rtl8812au/hal/rtl8812a/rtl8812a_dm.c

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
//============================================================
// Description:
//
// This file is for 92CE/92CU dynamic mechanism only
//
//
//============================================================
#define _RTL8812A_DM_C_

//============================================================
// include files
//============================================================
//#include <drv_types.h>
#include <rtl8812a_hal.h>

//============================================================
// Global var
//============================================================


static VOID
dm_CheckProtection(
	IN	PADAPTER	Adapter
	)
{
#if 0
	PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);
	u1Byte			CurRate, RateThreshold;

	if(pMgntInfo->pHTInfo->bCurBW40MHz)
		RateThreshold = MGN_MCS1;
	else
		RateThreshold = MGN_MCS3;

	if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold)
	{
		pMgntInfo->bDmDisableProtect = TRUE;
		DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
	}
	else
	{
		pMgntInfo->bDmDisableProtect = FALSE;
		DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
	}
#endif
}

static VOID
dm_CheckStatistics(
	IN	PADAPTER	Adapter
	)
{
#if 0
	if(!Adapter->MgntInfo.bMediaConnect)
		return;

	//2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly.
	rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) );

	// Calculate current Tx Rate(Successful transmited!!)

	// Calculate current Rx Rate(Successful received!!)

	//for tx tx retry count
	rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) );
#endif
}

static void dm_CheckPbcGPIO(_adapter *padapter)
{
	u8	tmp1byte;
	u8	bPbcPressed = _FALSE;

	if(!padapter->registrypriv.hw_wps_pbc)
		return;

#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
	if (IS_HARDWARE_TYPE_8812(padapter))
	{
		tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
		tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT);
		rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	//enable GPIO[2] as output mode

		tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
		rtw_write8(padapter,  GPIO_IN, tmp1byte);		//reset the floating voltage level

		tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
		tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
		rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	//enable GPIO[2] as input mode

		tmp1byte =rtw_read8(padapter, GPIO_IN);

		if (tmp1byte == 0xff)
			return ;

		if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)
		{
			bPbcPressed = _TRUE;
		}
	}
	else if (IS_HARDWARE_TYPE_8821(padapter))
	{
		tmp1byte = rtw_read8(padapter, GPIO_IO_SEL_8811A);
		tmp1byte |= (BIT4);
		rtw_write8(padapter, GPIO_IO_SEL_8811A, tmp1byte);	//enable GPIO[2] as output mode

		tmp1byte &= ~(BIT4);
		rtw_write8(padapter,  GPIO_IN_8811A, tmp1byte);		//reset the floating voltage level

		tmp1byte = rtw_read8(padapter, GPIO_IO_SEL_8811A);
		tmp1byte &= ~(BIT4);
		rtw_write8(padapter, GPIO_IO_SEL_8811A, tmp1byte);	//enable GPIO[2] as input mode

		tmp1byte =rtw_read8(padapter, GPIO_IN_8811A);

		if (tmp1byte == 0xff)
			return ;

		if (tmp1byte&BIT4)
		{
			bPbcPressed = _TRUE;
		}
	}
#else

#endif

	if( _TRUE == bPbcPressed)
	{
		// Here we only set bPbcPressed to true
		// After trigger PBC, the variable will be set to false
		DBG_8192C("CheckPbcGPIO - PBC is pressed\n");

		rtw_request_wps_pbc_event(padapter);
	}
}

#ifdef CONFIG_PCI_HCI
//
//	Description:
//		Perform interrupt migration dynamically to reduce CPU utilization.
//
//	Assumption:
//		1. Do not enable migration under WIFI test.
//
//	Created by Roger, 2010.03.05.
//
VOID
dm_InterruptMigration(
	IN	PADAPTER	Adapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
	BOOLEAN			bCurrentIntMt, bCurrentACIntDisable;
	BOOLEAN			IntMtToSet = _FALSE;
	BOOLEAN			ACIntToSet = _FALSE;


	// Retrieve current interrupt migration and Tx four ACs IMR settings first.
	bCurrentIntMt = pHalData->bInterruptMigration;
	bCurrentACIntDisable = pHalData->bDisableTxInt;

	//
	// <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics
	// when interrupt migration is set before. 2010.03.05.
	//
	if(!Adapter->registrypriv.wifi_spec &&
		(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) &&
		pmlmepriv->LinkDetectInfo.bHigherBusyTraffic)
	{
		IntMtToSet = _TRUE;

		// To check whether we should disable Tx interrupt or not.
		if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic )
			ACIntToSet = _TRUE;
	}

	//Update current settings.
	if( bCurrentIntMt != IntMtToSet ){
		DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet);
		if(IntMtToSet)
		{
			//
			// <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter.
			// timer 25ns*0xfa0=100us for 0xf packets.
			// 2010.03.05.
			//
			rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx
			pHalData->bInterruptMigration = IntMtToSet;
		}
		else
		{
			// Reset all interrupt migration settings.
			rtw_write32(Adapter, REG_INT_MIG, 0);
			pHalData->bInterruptMigration = IntMtToSet;
		}
	}

	/*if( bCurrentACIntDisable != ACIntToSet ){
		DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet);
		if(ACIntToSet) // Disable four ACs interrupts.
		{
			//
			// <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization.
			// When extremely highly Rx OK occurs, we will disable Tx interrupts.
			// 2010.03.05.
			//
			UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS );
			pHalData->bDisableTxInt = ACIntToSet;
		}
		else// Enable four ACs interrupts.
		{
			UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 );
			pHalData->bDisableTxInt = ACIntToSet;
		}
	}*/

}

#endif

//
// Initialize GPIO setting registers
//
static void
dm_InitGPIOSetting(
	IN	PADAPTER	Adapter
	)
{
	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);

	u8	tmp1byte;

	tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
	tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);

#ifdef CONFIG_BT_COEXIST
	// UMB-B cut bug. We need to support the modification.
	if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) &&
		pHalData->bt_coexist.BT_Coexist)
	{
		tmp1byte |= (BIT5);
	}
#endif
	rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);

}

// A mapping from HalData to ODM.
ODM_BOARD_TYPE_E boardType(u8 InterfaceSel)
{
    ODM_BOARD_TYPE_E        board	= ODM_BOARD_DEFAULT;

#ifdef CONFIG_PCI_HCI
	INTERFACE_SELECT_PCIE   pcie 	= (INTERFACE_SELECT_PCIE)InterfaceSel;
	switch (pcie) 
	{
        case INTF_SEL0_SOLO_MINICARD:       
            board |= ODM_BOARD_MINICARD;
            break;
        case INTF_SEL1_BT_COMBO_MINICARD:   
            board |= ODM_BOARD_BT;
			board |= ODM_BOARD_MINICARD;
            break;
        default:
            board = ODM_BOARD_DEFAULT;
            break;
	}                                

#elif defined(CONFIG_USB_HCI)
	INTERFACE_SELECT_USB    usb 	= (INTERFACE_SELECT_USB)InterfaceSel;
	switch (usb) 
	{
	    case INTF_SEL1_USB_High_Power:      
	        board |= ODM_BOARD_EXT_LNA;
	        board |= ODM_BOARD_EXT_PA;			
	        break;
	    case INTF_SEL2_MINICARD:            
	        board |= ODM_BOARD_MINICARD;
	        break;
	    case INTF_SEL4_USB_Combo:           
	        board |= ODM_BOARD_BT;
	        break;
	    case INTF_SEL5_USB_Combo_MF:        
	        board |= ODM_BOARD_BT;
	        break;
	    case INTF_SEL0_USB: 			
	    case INTF_SEL3_USB_Solo:            			
	    default:
	        board = ODM_BOARD_DEFAULT;
	        break;
	}
	
#endif	
	//DBG_871X("===> boardType(): (pHalData->InterfaceSel, pDM_Odm->BoardType) = (%d, %d)\n", InterfaceSel, board);

	return board;
}

//============================================================
// functions
//============================================================
static void Init_ODM_ComInfo_8812(PADAPTER	Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	EEPROM_EFUSE_PRIV	*pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);
	u8	cut_ver,fab_ver;
	u8	BoardType = ODM_BOARD_DEFAULT;
	
	//
	// Init Value
	//
	_rtw_memset(pDM_Odm,0,sizeof(pDM_Odm));
	
	pDM_Odm->Adapter = Adapter;	
	
	ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PLATFORM,ODM_CE);

	if (Adapter->interface_type == RTW_GSPI)
		ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,ODM_ITRF_SDIO);
	else
		ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,Adapter->interface_type);


	if (IS_HARDWARE_TYPE_8812(Adapter))
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_IC_TYPE, ODM_RTL8812);
	else if (IS_HARDWARE_TYPE_8821(Adapter))
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_IC_TYPE, ODM_RTL8821);


	fab_ver = ODM_TSMC;
	if (IS_VENDOR_8812A_C_CUT(Adapter))
		cut_ver = ODM_CUT_C;
	else
		cut_ver = ODM_CUT_A;	

	ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_FAB_VER,fab_ver);		
	ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_CUT_VER,cut_ver);

	ODM_CmnInfoInit(pDM_Odm,	ODM_CMNINFO_MP_TEST_CHIP,IS_NORMAL_CHIP(pHalData->VersionID));

	//1 ======= BoardType: ODM_CMNINFO_BOARD_TYPE =======
#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
	if(pHalData->InterfaceSel == INTF_SEL1_USB_High_Power)
	{
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_PA, 1);
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_LNA, 1);
	}
	else
	{
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_PA, pHalData->ExternalPA_2G);
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_LNA, 0);
	}
#else
	// PCIE no external PA now???
	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_PA, 0);
	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_LNA, 0);
#endif

	if (pHalData->ExternalLNA_2G != 0) {
		BoardType |= ODM_BOARD_EXT_LNA;
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_LNA, 1);
	}
	if (pHalData->ExternalLNA_5G != 0) {
		BoardType |= ODM_BOARD_EXT_LNA_5G;
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_5G_EXT_LNA, 1);
	}
	if (pHalData->ExternalPA_2G != 0) {
		BoardType |= ODM_BOARD_EXT_PA;
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_PA, 1);
	}
	if (pHalData->ExternalPA_5G != 0) {
		BoardType |= ODM_BOARD_EXT_PA_5G;
		ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_5G_EXT_PA, 1);
	}

	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_BOARD_TYPE, BoardType);

	//1 ============== End of BoardType ==============

	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_RFE_TYPE, pHalData->RFEType);

	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_EXT_TRSW, 0);

	ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PATCH_ID,pEEPROM->CustomerID);
	//	ODM_CMNINFO_BINHCT_TEST only for MP Team
	ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BWIFI_TEST,Adapter->registrypriv.wifi_spec);
		
	
	if(pHalData->rf_type == RF_1T1R){
		ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T1R);		
	}
	else if(pHalData->rf_type == RF_2T2R){
		ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_2T2R);		
	}
	else if(pHalData->rf_type == RF_1T2R){		
		ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T2R);		
	}

	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_RFE_TYPE, pHalData->RFEType);

 	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_RF_ANTENNA_TYPE, pHalData->TRxAntDivType);
	
	#ifdef CONFIG_DISABLE_ODM
	pdmpriv->InitODMFlag = 0;
	#else
	pdmpriv->InitODMFlag =	ODM_RF_CALIBRATION		|
							ODM_RF_TX_PWR_TRACK	//|
							;	
	//if(pHalData->AntDivCfg)
	//	pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;
	#endif	

	ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_ABILITY,pdmpriv->InitODMFlag);
	
}
static void Update_ODM_ComInfo_8812(PADAPTER	Adapter)
{
	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
	struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;	
	int i;	
	#ifdef CONFIG_DISABLE_ODM
	pdmpriv->InitODMFlag = 0;
	#else //CONFIG_DISABLE_ODM
	
	pdmpriv->InitODMFlag =	ODM_BB_DIG				|
#ifdef	CONFIG_ODM_REFRESH_RAMASK
							ODM_BB_RA_MASK		|
#endif
							ODM_BB_FA_CNT			|
							ODM_BB_RSSI_MONITOR	|
							ODM_RF_TX_PWR_TRACK	|	// For RF
							ODM_MAC_EDCA_TURBO
							;	
	if(pHalData->AntDivCfg)
		pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;

	#if (MP_DRIVER==1)
		if (Adapter->registrypriv.mp_mode == 1)
		{
		pdmpriv->InitODMFlag = 	ODM_RF_CALIBRATION	|
								ODM_RF_TX_PWR_TRACK;	
		}
	#endif//(MP_DRIVER==1)
	
	#endif//CONFIG_DISABLE_ODM	
	ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_ABILITY,pdmpriv->InitODMFlag);
	
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_TX_UNI,&(Adapter->xmitpriv.tx_bytes));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_RX_UNI,&(Adapter->recvpriv.rx_bytes));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_WM_MODE,&(pmlmeext->cur_wireless_mode));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BAND,&(pHalData->CurrentBandType));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_FORCED_RATE,&(pHalData->ForcedDataRate));
	
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_CHNL_OFFSET,&(pHalData->nCur40MhzPrimeSC));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_MODE,&(Adapter->securitypriv.dot11PrivacyAlgrthm));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BW,&(pHalData->CurrentChannelBW ));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_CHNL,&( pHalData->CurrentChannel));	
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_NET_CLOSED,&( Adapter->net_closed));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MP_MODE,&(Adapter->registrypriv.mp_mode));
	//================= only for 8192D   =================
	/*
	//pHalData->CurrentBandType92D
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_GET_VALUE,&(pDM_Odm->u1Byte_temp));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BUDDY_ADAPTOR,&(pDM_Odm->PADAPTER_temp));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_IS_MASTER,&(pDM_Odm->u1Byte_temp));
	//================= only for 8192D   =================
	// driver havn't those variable now
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_OPERATION,&(pDM_Odm->u1Byte_temp));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_DISABLE_EDCA,&(pDM_Odm->u1Byte_temp));
	*/
	
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SCAN,&(pmlmepriv->bScanInProcess));
	ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_POWER_SAVING,&(pwrctrlpriv->bpower_saving));
	ODM_CmnInfoInit(pDM_Odm, ODM_CMNINFO_RF_ANTENNA_TYPE, pHalData->TRxAntDivType);

	for(i=0; i< NUM_STA; i++)
	{
		//pDM_Odm->pODM_StaInfo[i] = NULL;
		ODM_CmnInfoPtrArrayHook(pDM_Odm, ODM_CMNINFO_STA_STATUS,i,NULL);
	}	
}

void
rtl8812_InitHalDm(
	IN	PADAPTER	Adapter
	)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);
	u8	i;

#ifdef CONFIG_USB_HCI
	dm_InitGPIOSetting(Adapter);
#endif

	pdmpriv->DM_Type = DM_Type_ByDriver;
	pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;
	
	Update_ODM_ComInfo_8812(Adapter);
	ODM_DMInit(pDM_Odm);

	Adapter->fix_rate = 0xFF;

}


VOID
rtl8812_HalDmWatchDog(
	IN	PADAPTER	Adapter
	)
{
	BOOLEAN		bFwCurrentInPSMode = _FALSE;
	BOOLEAN		bFwPSAwake = _TRUE;
	u8 hw_init_completed = _FALSE;
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &(pHalData->odmpriv);
#ifdef CONFIG_CONCURRENT_MODE
	PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
#endif //CONFIG_CONCURRENT_MODE

	_func_enter_;

	hw_init_completed = Adapter->hw_init_completed;

	if (hw_init_completed == _FALSE)
		goto skip_dm;

#ifdef CONFIG_LPS
	#ifdef CONFIG_CONCURRENT_MODE
	if (Adapter->iface_type != IFACE_PORT0 && pbuddy_adapter) {
		bFwCurrentInPSMode = pbuddy_adapter->pwrctrlpriv.bFwCurrentInPSMode;
		rtw_hal_get_hwreg(pbuddy_adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake));
	} else
	#endif //CONFIG_CONCURRENT_MODE
	{
		bFwCurrentInPSMode = Adapter->pwrctrlpriv.bFwCurrentInPSMode;
		rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake));
	}
#endif

#ifdef CONFIG_P2P_PS
	// Fw is under p2p powersaving mode, driver should stop dynamic mechanism.
	// modifed by thomas. 2011.06.11.
	if(Adapter->wdinfo.p2p_ps_mode)
		bFwPSAwake = _FALSE;
#endif //CONFIG_P2P_PS

	if( (hw_init_completed == _TRUE)
		&& ((!bFwCurrentInPSMode) && bFwPSAwake))
	{
		//
		// Calculate Tx/Rx statistics.
		//
		dm_CheckStatistics(Adapter);	
	
		//
		// Dynamically switch RTS/CTS protection.
		//
		//dm_CheckProtection(Adapter);

#ifdef CONFIG_PCI_HCI
		// 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput.
		// Tx Migration settings.
		//dm_InterruptMigration(Adapter);

		//if(Adapter->HalFunc.TxCheckStuckHandler(Adapter))
		//	PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem));
#endif
	
	}

	//ODM
	if (hw_init_completed == _TRUE)
	{
		u8	bLinked=_FALSE;

		#ifdef CONFIG_DISABLE_ODM
		pHalData->odmpriv.SupportAbility = 0;
		#endif

		if(rtw_linked_check(Adapter))
			bLinked = _TRUE;

#ifdef CONFIG_CONCURRENT_MODE
		if(pbuddy_adapter && rtw_linked_check(pbuddy_adapter))
			bLinked = _TRUE;
#endif //CONFIG_CONCURRENT_MODE

		ODM_CmnInfoUpdate(&pHalData->odmpriv ,ODM_CMNINFO_LINK, bLinked);
		ODM_DMWatchdog(&pHalData->odmpriv);
			
	}

skip_dm:

	// Check GPIO to determine current RF on/off and Pbc status.
	// Check Hardware Radio ON/OFF or not
#ifdef CONFIG_PCI_HCI
	if(pHalData->bGpioHwWpsPbc)
#endif
	{
		//temp removed
		dm_CheckPbcGPIO(Adapter);
	}
	return;
}

void rtl8812_init_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
	//_rtw_spinlock_init(&(pHalData->odm_stainfo_lock));
	Init_ODM_ComInfo_8812(Adapter);
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
	//_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);	
	ODM_InitAllTimers(podmpriv );	
#endif
	ODM_InitDebugSetting(podmpriv);

	Adapter->registrypriv.RegEnableTxPowerLimit = 0;
	Adapter->registrypriv.RegPowerBase = 14;
	Adapter->registrypriv.RegTxPwrLimit = 0xFFFFFFFF;
	Adapter->registrypriv.TxBBSwing_2G = 0xFF;
	Adapter->registrypriv.TxBBSwing_5G = 0xFF;
	Adapter->registrypriv.bEn_RFE = 0;
	Adapter->registrypriv.RFE_Type = 64;
	pHalData->RegRFPathS1 = 0;
	pHalData->TxPwrInPercentage = TX_PWR_PERCENTAGE_3;
}

void rtl8812_deinit_dm_priv(IN PADAPTER Adapter)
{
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T 		podmpriv = &pHalData->odmpriv;
	//_rtw_spinlock_free(&pHalData->odm_stainfo_lock);
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
	//_cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer);	
	ODM_CancelAllTimers(podmpriv);	
#endif
}


#ifdef CONFIG_ANTENNA_DIVERSITY
// Add new function to reset the state of antenna diversity before link.
//
// Compare RSSI for deciding antenna
void	AntDivCompare8812(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src)
{
	//PADAPTER Adapter = pDM_Odm->Adapter ;
	
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	if(0 != pHalData->AntDivCfg )
	{
		//DBG_8192C("update_network=> orgRSSI(%d)(%d),newRSSI(%d)(%d)\n",dst->Rssi,query_rx_pwr_percentage(dst->Rssi),
		//	src->Rssi,query_rx_pwr_percentage(src->Rssi));
		//select optimum_antenna for before linked =>For antenna diversity
		if(dst->Rssi >=  src->Rssi )//keep org parameter
		{
			src->Rssi = dst->Rssi;
			src->PhyInfo.Optimum_antenna = dst->PhyInfo.Optimum_antenna;						
		}
	}
}

// Add new function to reset the state of antenna diversity before link.
u8 AntDivBeforeLink8812(PADAPTER Adapter )
{
	
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);	
	PDM_ODM_T 	pDM_Odm =&pHalData->odmpriv;
	SWAT_T		*pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
	
	// Condition that does not need to use antenna diversity.
	if(pHalData->AntDivCfg==0)
	{
		//DBG_8192C("odm_AntDivBeforeLink8192C(): No AntDiv Mechanism.\n");
		return _FALSE;
	}

	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	
	{		
		return _FALSE;
	}


	if(pDM_SWAT_Table->SWAS_NoLink_State == 0){
		//switch channel
		pDM_SWAT_Table->SWAS_NoLink_State = 1;
		pDM_SWAT_Table->CurAntenna = (pDM_SWAT_Table->CurAntenna==MAIN_ANT)?AUX_ANT:MAIN_ANT;

		//PHY_SetBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300, pDM_SWAT_Table->CurAntenna);
		rtw_antenna_select_cmd(Adapter, pDM_SWAT_Table->CurAntenna, _FALSE);
		//DBG_8192C("%s change antenna to ANT_( %s ).....\n",__FUNCTION__, (pDM_SWAT_Table->CurAntenna==MAIN_ANT)?"MAIN":"AUX");
		return _TRUE;
	}
	else
	{
		pDM_SWAT_Table->SWAS_NoLink_State = 0;
		return _FALSE;
	}	

}
#endif