rtl8812au/hal/rtl8812a/usb/usb_halinit.c

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#define _HCI_HAL_INIT_C_

//#include <drv_types.h>
#include <rtl8812a_hal.h>

#ifndef CONFIG_USB_HCI

#error "CONFIG_USB_HCI shall be on!\n"

#endif


static void _dbg_dump_macreg(_adapter *padapter)
{
	u32 offset = 0;
	u32 val32 = 0;
	u32 index =0 ;
	for(index=0;index<64;index++)
	{
		offset = index*4;
		val32 = rtw_read32(padapter,offset);
		DBG_8192C("offset : 0x%02x ,val:0x%08x\n",offset,val32);
	}
}

static VOID
_ConfigChipOutEP_8812(
	IN	PADAPTER	pAdapter,
	IN	u8		NumOutPipe
	)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(pAdapter);


	pHalData->OutEpQueueSel = 0;
	pHalData->OutEpNumber = 0;

	switch(NumOutPipe){
		case 	4:
				pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_LQ|TX_SELE_NQ;
				pHalData->OutEpNumber=4;
				break;		
		case 	3:
				pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_LQ|TX_SELE_NQ;
				pHalData->OutEpNumber=3;
				break;
		case 	2:
				pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_NQ;
				pHalData->OutEpNumber=2;
				break;
		case 	1:
				pHalData->OutEpQueueSel=TX_SELE_HQ;
				pHalData->OutEpNumber=1;
				break;
		default:				
				break;
			
	}
	DBG_871X("%s OutEpQueueSel(0x%02x), OutEpNumber(%d) \n",__FUNCTION__,pHalData->OutEpQueueSel,pHalData->OutEpNumber );

}

static BOOLEAN HalUsbSetQueuePipeMapping8812AUsb(
	IN	PADAPTER	pAdapter,
	IN	u8		NumInPipe,
	IN	u8		NumOutPipe
	)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(pAdapter);
	BOOLEAN			result		= _FALSE;

	_ConfigChipOutEP_8812(pAdapter, NumOutPipe);
	
	// Normal chip with one IN and one OUT doesn't have interrupt IN EP.
	if(1 == pHalData->OutEpNumber){
		if(1 != NumInPipe){
			return result;
		}
	}

	// All config other than above support one Bulk IN and one Interrupt IN.
	//if(2 != NumInPipe){
	//	return result;
	//}

	result = Hal_MappingOutPipe(pAdapter, NumOutPipe);
	
	return result;

}

void rtl8812au_interface_configure(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(padapter);
	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);

	if (IS_SUPER_SPEED_USB(padapter))
	{
		pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;//1024 bytes
	}
	else if (IS_HIGH_SPEED_USB(padapter))
	{
		pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes
	}
	else
	{
		pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes
	}

	pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;

#ifdef CONFIG_USB_TX_AGGREGATION
	pHalData->UsbTxAggMode		= 1;
	pHalData->UsbTxAggDescNum	= 6;	// only 4 bits

	if(IS_HARDWARE_TYPE_8812AU(padapter))    //page added for Jaguar
		pHalData->UsbTxAggDescNum = 3;
#endif

#ifdef CONFIG_USB_RX_AGGREGATION
	pHalData->UsbRxAggMode		= USB_RX_AGG_DMA;// USB_RX_AGG_DMA;
	pHalData->UsbRxAggBlockCount	= 8; //unit : 512b
	pHalData->UsbRxAggBlockTimeout	= 0x6;
	pHalData->UsbRxAggPageCount	= 16; //uint :128 b //0x0A;	// 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize
	pHalData->UsbRxAggPageTimeout = 0x6; //6, absolute time = 34ms/(2^6)

	pHalData->RegAcUsbDmaSize = 4;
	pHalData->RegAcUsbDmaTime = 8;
#endif

	HalUsbSetQueuePipeMapping8812AUsb(padapter,
				pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);

}

static VOID
_InitBurstPktLen(IN PADAPTER Adapter)
{
	u1Byte speedvalue, provalue, temp;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
 	

	//rtw_write16(Adapter, REG_TRXDMA_CTRL_8195, 0xf5b0);
	//rtw_write16(Adapter, REG_TRXDMA_CTRL_8812, 0xf5b4);
	rtw_write8(Adapter, 0xf050, 0x01);  //usb3 rx interval
	rtw_write16(Adapter, REG_RXDMA_STATUS, 0x7400);  //burset lenght=4, set 0x3400 for burset length=2
	rtw_write8(Adapter, 0x289,0xf5);				//for rxdma control
	//rtw_write8(Adapter, 0x3a, 0x46);

	// 0x456 = 0x70, sugguested by Zhilin
	rtw_write8(Adapter, REG_AMPDU_MAX_TIME_8812, 0x70);

	rtw_write32(Adapter, 0x458, 0xffffffff);
	rtw_write8(Adapter, REG_USTIME_TSF, 0x50);
	rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);

	if(IS_HARDWARE_TYPE_8821U(Adapter))
		speedvalue = BIT7;	
	else
		speedvalue = rtw_read8(Adapter, 0xff); //check device operation speed: SS 0xff bit7

	if(speedvalue & BIT7)   //USB2/1.1 Mode
	{
		temp = rtw_read8(Adapter, 0xfe17);
		if(((temp>>4)&0x03)==0)
		{
			pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;
			provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
			rtw_write8(Adapter, REG_RXDMA_PRO_8812, ((provalue|BIT(4))&(~BIT(5)))); //set burst pkt len=512B
			rtw_write16(Adapter, REG_RXDMA_PRO_8812, 0x1e);
		}
		else
		{
			pHalData->UsbBulkOutSize = 64;
			provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
			rtw_write8(Adapter, REG_RXDMA_PRO_8812, ((provalue|BIT(5))&(~BIT(4)))); //set burst pkt len=64B
		}

		rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH,0x2005); //dmc agg th 20K
		
		//rtw_write8(Adapter, 0x10c, 0xb4);
		//hal_UphyUpdate8812AU(Adapter);

		pHalData->bSupportUSB3 = _FALSE;
	}
	else  //USB3 Mode
	{
		pHalData->UsbBulkOutSize = USB_SUPER_SPEED_BULK_SIZE;
		provalue = rtw_read8(Adapter, REG_RXDMA_PRO_8812);
		rtw_write8(Adapter, REG_RXDMA_PRO_8812, provalue&(~(BIT5|BIT4))); //set burst pkt len=1k
		rtw_write16(Adapter, REG_RXDMA_PRO_8812, 0x0e);
		//PlatformEFIOWrite2Byte(Adapter, REG_RXDMA_AGG_PG_TH,0x0a05); //dmc agg th 20K
		pHalData->bSupportUSB3 = _TRUE;

		// set Reg 0xf008[3:4] to 2'00 to disable U1/U2 Mode to avoid 2.5G spur in USB3.0. added by page, 20120712
		rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008)&0xE7);
	}

#ifdef CONFIG_USB_TX_AGGREGATION
	//rtw_write8(Adapter, REG_TDECTRL_8195, 0x30);
#else
	rtw_write8(Adapter, REG_TDECTRL, 0x10);
#endif
	
	temp = rtw_read8(Adapter, REG_SYS_FUNC_EN);
	rtw_write8(Adapter, REG_SYS_FUNC_EN, temp&(~BIT(10))); //reset 8051
	
	rtw_write8(Adapter, REG_HT_SINGLE_AMPDU_8812,rtw_read8(Adapter, REG_HT_SINGLE_AMPDU_8812)|BIT(7)); //enable single pkt ampdu
	rtw_write8(Adapter, REG_RX_PKT_LIMIT, 0x18);		//for VHT packet length 11K

	rtw_write8(Adapter, REG_PIFS, 0x00);

	//Suggention by SD1 Jong and Pisa, by Maddest 20130107.
	if(IS_HARDWARE_TYPE_8821U(Adapter) && (Adapter->registrypriv.wifi_spec == _FALSE))
	{
		rtw_write16(Adapter, REG_MAX_AGGR_NUM, 0x0a0a);
		rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, 0x80);
		rtw_write8(Adapter, REG_AMPDU_MAX_TIME_8812, 0x5e);
		rtw_write32(Adapter, REG_FAST_EDCA_CTRL, 0x03087777);
	}
	else
	{
		rtw_write8(Adapter, REG_MAX_AGGR_NUM, 0x1f);
		rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, rtw_read8(Adapter, REG_FWHW_TXQ_CTRL)&(~BIT(7)));
	}

	if(pHalData->AMPDUBurstMode)
	{
		rtw_write8(Adapter,REG_AMPDU_BURST_MODE_8812,  0x5F);
	}
	
	rtw_write8(Adapter, 0x1c, rtw_read8(Adapter, 0x1c) | BIT(5) |BIT(6));  //to prevent mac is reseted by bus. 20111208, by Page

	// ARFB table 9 for 11ac 5G 2SS
	rtw_write32(Adapter, REG_ARFR0, 0x00000010);
	if(IS_NORMAL_CHIP(pHalData->VersionID))
		rtw_write32(Adapter, REG_ARFR0+4, 0xfffff000);
	else
		rtw_write32(Adapter, REG_ARFR0+4, 0x3e0ff000);

	// ARFB table 10 for 11ac 5G 1SS
	rtw_write32(Adapter, REG_ARFR1, 0x00000010);
	if(IS_VENDOR_8812A_TEST_CHIP(Adapter))
		rtw_write32(Adapter, REG_ARFR1_8812+4, 0x000ff000);
	else
		rtw_write32(Adapter, REG_ARFR1_8812+4, 0x003ff000);
	
}

static u32 _InitPowerOn8812AU(_adapter *padapter)
{
	u16	u2btmp = 0;
	u8	u1btmp = 0;

	if(IS_VENDOR_8821A_MP_CHIP(padapter))
	{
		// HW Power on sequence
		if(!HalPwrSeqCmdParsing(padapter, PWR_CUT_A_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_ENABLE_FLOW)) {
			DBG_871X(KERN_ERR "%s: run power on flow fail\n", __func__);
			return _FAIL;
		}
	}
	else if(IS_HARDWARE_TYPE_8821U(padapter))
	{
		if(!HalPwrSeqCmdParsing(padapter, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_ENABLE_FLOW)) {
			DBG_871X(KERN_ERR "%s: run power on flow fail\n", __func__);
			return _FAIL;
		}
	}
	else
	{
		if(!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_ENABLE_FLOW)) {
			DBG_871X(KERN_ERR "%s: run power on flow fail\n", __func__);
			return _FAIL;
		}
	}

	// Enable MAC DMA/WMAC/SCHEDULE/SEC block
	// Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31.
	rtw_write16(padapter, REG_CR, 0x00);  //suggseted by zhouzhou, by page, 20111230
	u2btmp = rtw_read16(padapter, REG_CR);
	u2btmp |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
				| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
	rtw_write16(padapter, REG_CR, u2btmp);

	//Need remove below furture, suggest by Jackie. 
	// if 0xF0[24] =1 (LDO), need to set the 0x7C[6] to 1.
	if(IS_HARDWARE_TYPE_8821U(padapter))
	{
		u1btmp = rtw_read8(padapter, REG_SYS_CFG+3);
		if(u1btmp & BIT0) //LDO mode.
		{
			u1btmp =rtw_read8(padapter, 0x7c);	
			rtw_write8(padapter,0x7c,u1btmp | BIT6);
		}
	}

	return _SUCCESS;
}





//---------------------------------------------------------------
//
//	MAC init functions
//
//---------------------------------------------------------------

// Shall USB interface init this?
static VOID
_InitInterrupt_8812AU(
	IN  PADAPTER Adapter
	)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);

	// HIMR
	rtw_write32(Adapter, REG_HIMR0_8812, pHalData->IntrMask[0]&0xFFFFFFFF);
	rtw_write32(Adapter, REG_HIMR1_8812, pHalData->IntrMask[1]&0xFFFFFFFF);
}

static VOID
_InitQueueReservedPage_8821AUsb(
	IN  PADAPTER Adapter
	)
{
	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
	struct registry_priv	*pregistrypriv = &Adapter->registrypriv;
	u32			numHQ		= 0;
	u32			numLQ		= 0;
	u32			numNQ		= 0;
	u32			numPubQ	= 0;
	u32			value32;
	u8			value8;
	BOOLEAN			bWiFiConfig	= pregistrypriv->wifi_spec;

	if(!bWiFiConfig)
	{
		numPubQ = NORMAL_PAGE_NUM_PUBQ_8821;
		
		if(pHalData->OutEpQueueSel & TX_SELE_HQ)
		{
			numHQ = NORMAL_PAGE_NUM_HPQ_8821;
		}
		
		if(pHalData->OutEpQueueSel & TX_SELE_LQ)
		{
			numLQ = NORMAL_PAGE_NUM_LPQ_8821;
		}
		
		// NOTE: This step shall be proceed before writting REG_RQPN.		
		if(pHalData->OutEpQueueSel & TX_SELE_NQ){
			numNQ = NORMAL_PAGE_NUM_NPQ_8821;
		}
	}
	else
	{ // WMM
		numPubQ = WMM_NORMAL_PAGE_NUM_PUBQ_8821;
		
		if(pHalData->OutEpQueueSel & TX_SELE_HQ)
		{
			numHQ = WMM_NORMAL_PAGE_NUM_HPQ_8821;
		}
		
		if(pHalData->OutEpQueueSel & TX_SELE_LQ)
		{
			numLQ = WMM_NORMAL_PAGE_NUM_LPQ_8821;
		}
		
		// NOTE: This step shall be proceed before writting REG_RQPN.		
		if(pHalData->OutEpQueueSel & TX_SELE_NQ){
			numNQ = WMM_NORMAL_PAGE_NUM_NPQ_8821;
		}
	}

	value8 = (u8)_NPQ(numNQ);
	rtw_write8(Adapter, REG_RQPN_NPQ, value8);

	// TX DMA
	value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
	rtw_write32(Adapter, REG_RQPN, value32);
}

static VOID
_InitQueueReservedPage_8812AUsb(
	IN  PADAPTER Adapter
	)
{
	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
	struct registry_priv	*pregistrypriv = &Adapter->registrypriv;
	u32			numHQ		= 0;
	u32			numLQ		= 0;
	u32			numNQ		= 0;
	u32			numPubQ	= 0;
	u32			value32;
	u8			value8;
	BOOLEAN			bWiFiConfig	= pregistrypriv->wifi_spec;

	if(!bWiFiConfig)
	{
		numPubQ = NORMAL_PAGE_NUM_PUBQ_8812;
		
		if(pHalData->OutEpQueueSel & TX_SELE_HQ)
		{
			numHQ = NORMAL_PAGE_NUM_HPQ_8812;
		}
		
		if(pHalData->OutEpQueueSel & TX_SELE_LQ)
		{
			numLQ = NORMAL_PAGE_NUM_LPQ_8812;
		}
		
		// NOTE: This step shall be proceed before writting REG_RQPN.		
		if(pHalData->OutEpQueueSel & TX_SELE_NQ){
			numNQ = NORMAL_PAGE_NUM_NPQ_8812;
		}
	}
	else
	{ // WMM
		numPubQ = WMM_NORMAL_PAGE_NUM_PUBQ_8812;
		
		if(pHalData->OutEpQueueSel & TX_SELE_HQ)
		{
			numHQ = WMM_NORMAL_PAGE_NUM_HPQ_8812;
		}
		
		if(pHalData->OutEpQueueSel & TX_SELE_LQ)
		{
			numLQ = WMM_NORMAL_PAGE_NUM_LPQ_8812;
		}
		
		// NOTE: This step shall be proceed before writting REG_RQPN.		
		if(pHalData->OutEpQueueSel & TX_SELE_NQ){
			numNQ = WMM_NORMAL_PAGE_NUM_NPQ_8812;
		}
	}

	value8 = (u8)_NPQ(numNQ);
	rtw_write8(Adapter, REG_RQPN_NPQ, value8);

	// TX DMA
	value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
	rtw_write32(Adapter, REG_RQPN, value32);
}

static void _InitID_8812A(IN  PADAPTER Adapter)
{
	hal_init_macaddr(Adapter);//set mac_address
}

static VOID
_InitTxBufferBoundary_8821AUsb(
	IN PADAPTER Adapter
	)
{	
	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
	u8	txpktbuf_bndy; 

	if(!pregistrypriv->wifi_spec){
		txpktbuf_bndy = TX_PAGE_BOUNDARY_8821;
	}
	else
	{//for WMM
		txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8821;
	}

	rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy);
	rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy);
	rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy);
	rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);	
	rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);

#ifdef CONFIG_CONCURRENT_MODE
	rtw_write8(Adapter, REG_BCNQ1_BDNY, txpktbuf_bndy+8);
	rtw_write8(Adapter, REG_TDECTRL1_8812+1, txpktbuf_bndy+8);//BCN1_HEAD
	// BIT1- BIT_SW_BCN_SEL_EN
	rtw_write8(Adapter, REG_TDECTRL1_8812+2, rtw_read8(Adapter, REG_TDECTRL1_8812+2)|BIT1);	
#endif
	
}

static VOID
_InitTxBufferBoundary_8812AUsb(
	IN PADAPTER Adapter
	)
{	
	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
	u8	txpktbuf_bndy; 

	if(!pregistrypriv->wifi_spec){
		txpktbuf_bndy = TX_PAGE_BOUNDARY_8812;
	}
	else
	{//for WMM
		txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8812;
	}

	rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy);
	rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy);
	rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy);
	rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);	
	rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
	
}

static VOID
_InitPageBoundary_8812AUsb(
	IN  PADAPTER Adapter
	)
{
	//u2Byte 			rxff_bndy;
	//u2Byte			Offset;
	//BOOLEAN			bSupportRemoteWakeUp;
	
	//Adapter->HalFunc.GetHalDefVarHandler(Adapter, HAL_DEF_WOWLAN , &bSupportRemoteWakeUp);
	// RX Page Boundary
	//srand(static_cast<unsigned int>(time(NULL)) );
	
//	Offset = MAX_RX_DMA_BUFFER_SIZE_8812/256;
//	rxff_bndy = (Offset*256)-1;

	if(IS_HARDWARE_TYPE_8812(Adapter))
		rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), MAX_RX_DMA_BUFFER_SIZE_8812-1);
	else 
		rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), MAX_RX_DMA_BUFFER_SIZE_8821-1);
	
}


static VOID
_InitNormalChipRegPriority_8812AUsb(
	IN	PADAPTER	Adapter,
	IN	u16		beQ,
	IN	u16		bkQ,
	IN	u16		viQ,
	IN	u16		voQ,
	IN	u16		mgtQ,
	IN	u16		hiQ
	)
{
	u16 value16	= (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);

	value16 |=	_TXDMA_BEQ_MAP(beQ) 	| _TXDMA_BKQ_MAP(bkQ) |
				_TXDMA_VIQ_MAP(viQ) 	| _TXDMA_VOQ_MAP(voQ) |
				_TXDMA_MGQ_MAP(mgtQ)| _TXDMA_HIQ_MAP(hiQ);
	
	rtw_write16(Adapter, REG_TRXDMA_CTRL, value16);
}

static VOID
_InitNormalChipTwoOutEpPriority_8812AUsb(
	IN	PADAPTER Adapter
	)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
	u16			beQ,bkQ,viQ,voQ,mgtQ,hiQ;
	

	u16	valueHi = 0;
	u16	valueLow = 0;
	
	switch(pHalData->OutEpQueueSel)
	{
		case (TX_SELE_HQ | TX_SELE_LQ):
			valueHi = QUEUE_HIGH;
			valueLow = QUEUE_LOW;
			break;
		case (TX_SELE_NQ | TX_SELE_LQ):
			valueHi = QUEUE_NORMAL;
			valueLow = QUEUE_LOW;
			break;
		case (TX_SELE_HQ | TX_SELE_NQ):
			valueHi = QUEUE_HIGH;
			valueLow = QUEUE_NORMAL;
			break;
		default:
			valueHi = QUEUE_HIGH;
			valueLow = QUEUE_NORMAL;
			break;
	}

	if(!pregistrypriv->wifi_spec ){
		beQ		= valueLow;
		bkQ		= valueLow;
		viQ		= valueHi;
		voQ		= valueHi;
		mgtQ	= valueHi; 
		hiQ		= valueHi;								
	}
	else{//for WMM ,CONFIG_OUT_EP_WIFI_MODE
		beQ		= valueLow;
		bkQ		= valueHi;		
		viQ		= valueHi;
		voQ		= valueLow;
		mgtQ	= valueHi;
		hiQ		= valueHi;							
	}

	_InitNormalChipRegPriority_8812AUsb(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);

}

static VOID
_InitNormalChipThreeOutEpPriority_8812AUsb(
	IN	PADAPTER Adapter
	)
{
	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
	u16			beQ,bkQ,viQ,voQ,mgtQ,hiQ;

	if(!pregistrypriv->wifi_spec ){// typical setting
		beQ		= QUEUE_LOW;
		bkQ 		= QUEUE_LOW;
		viQ 		= QUEUE_NORMAL;
		voQ 		= QUEUE_HIGH;
		mgtQ 	= QUEUE_HIGH;
		hiQ 		= QUEUE_HIGH;			
	}
	else{// for WMM
		beQ		= QUEUE_LOW;
		bkQ 		= QUEUE_NORMAL;
		viQ 		= QUEUE_NORMAL;
		voQ 		= QUEUE_HIGH;
		mgtQ 	= QUEUE_HIGH;
		hiQ 		= QUEUE_HIGH;			
	}
	_InitNormalChipRegPriority_8812AUsb(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);
}

static VOID
_InitQueuePriority_8812AUsb(
	IN	PADAPTER Adapter
	)
{
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);

	switch(pHalData->OutEpNumber)
	{
		case 2:
			_InitNormalChipTwoOutEpPriority_8812AUsb(Adapter);
			break;
		case 3:
		case 4:
			_InitNormalChipThreeOutEpPriority_8812AUsb(Adapter);
			break;
		default:
			DBG_871X("_InitQueuePriority_8812AUsb(): Shall not reach here!\n");
			break;
	}
}



static VOID
_InitHardwareDropIncorrectBulkOut_8812A(
	IN  PADAPTER Adapter
	)
{
	u32	value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
	value32 |= DROP_DATA_EN;
	rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
}

static VOID
_InitNetworkType_8812A(
	IN  PADAPTER Adapter
	)
{
	u32	value32;

	value32 = rtw_read32(Adapter, REG_CR);
	// TODO: use the other function to set network type
	value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);

	rtw_write32(Adapter, REG_CR, value32);
}

static VOID
_InitTransferPageSize_8812AUsb(
	IN  PADAPTER Adapter
	)
{
	
	u8	value8;
	value8 = _PSTX(PBP_512);

	PlatformEFIOWrite1Byte(Adapter, REG_PBP, value8);
}

static VOID
_InitDriverInfoSize_8812A(
	IN  PADAPTER	Adapter,
	IN	u8		drvInfoSize
	)
{
	rtw_write8(Adapter,REG_RX_DRVINFO_SZ, drvInfoSize);
}

static VOID
_InitWMACSetting_8812A(
	IN  PADAPTER Adapter
	)
{
	//u4Byte			value32;
	//u16			value16;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);

	//pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS;
	pHalData->ReceiveConfig = 
	RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF;	  

#if (1 == RTL8812A_RX_PACKET_INCLUDE_CRC)
	pHalData->ReceiveConfig |= ACRC32;
#endif

	if(IS_HARDWARE_TYPE_8812AU(Adapter) || IS_HARDWARE_TYPE_8821U(Adapter))
		pHalData->ReceiveConfig |= FORCEACK;

	// some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile()
	rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig);

	// Accept all multicast address
	rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
	rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);


	// Accept all data frames
	//value16 = 0xFFFF;
	//rtw_write16(Adapter, REG_RXFLTMAP2, value16);

	// 2010.09.08 hpfan
	// Since ADF is removed from RCR, ps-poll will not be indicate to driver,
	// RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
	//value16 = 0x400;
	//rtw_write16(Adapter, REG_RXFLTMAP1, value16);

	// Accept all management frames
	//value16 = 0xFFFF;
	//rtw_write16(Adapter, REG_RXFLTMAP0, value16);

	//enable RX_SHIFT bits
	//rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1));	

}

static VOID
_InitAdaptiveCtrl_8812AUsb(
	IN  PADAPTER Adapter
	)
{
	u16	value16;
	u32	value32;

	// Response Rate Set
	value32 = rtw_read32(Adapter, REG_RRSR);
	value32 &= ~RATE_BITMAP_ALL;

	if(Adapter->registrypriv.wireless_mode & WIRELESS_11B)
		value32 |= RATE_RRSR_CCK_ONLY_1M;
	else
		value32 |= RATE_RRSR_WITHOUT_CCK;

	value32 |= RATE_RRSR_CCK_ONLY_1M;
	rtw_write32(Adapter, REG_RRSR, value32);

	// CF-END Threshold
	//m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1);

	// SIFS (used in NAV)
	value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
	rtw_write16(Adapter, REG_SPEC_SIFS, value16);

	// Retry Limit
	value16 = _LRL(0x30) | _SRL(0x30);
	rtw_write16(Adapter, REG_RL, value16);
	
}

static VOID
_InitEDCA_8812AUsb(
	IN  PADAPTER Adapter
	)
{
	// Set Spec SIFS (used in NAV)
	rtw_write16(Adapter,REG_SPEC_SIFS, 0x100a);
	rtw_write16(Adapter,REG_MAC_SPEC_SIFS, 0x100a);

	// Set SIFS for CCK
	rtw_write16(Adapter,REG_SIFS_CTX, 0x100a);	

	// Set SIFS for OFDM
	rtw_write16(Adapter,REG_SIFS_TRX, 0x100a);

	// TXOP
	rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
	rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
	rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
	rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);

	// 0x50 for 80MHz clock
	rtw_write8(Adapter, REG_USTIME_TSF, 0x50);
	rtw_write8(Adapter, REG_USTIME_EDCA, 0x50);
}


static VOID
_InitBeaconMaxError_8812A(
	IN  PADAPTER	Adapter,
	IN	BOOLEAN		InfraMode
	)
{
#ifdef RTL8192CU_ADHOC_WORKAROUND_SETTING
	rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF);	
#else
	//rtw_write8(Adapter, REG_BCN_MAX_ERR, (InfraMode ? 0xFF : 0x10));	
#endif
}


#ifdef CONFIG_LED
static void _InitHWLed(PADAPTER Adapter)
{
	struct led_priv *pledpriv = &(Adapter->ledpriv);
	
	if( pledpriv->LedStrategy != HW_LED)
		return;
	
// HW led control
// to do .... 
//must consider cases of antenna diversity/ commbo card/solo card/mini card

}
#endif //CONFIG_LED

static VOID
_InitRDGSetting_8812A(
	IN	PADAPTER Adapter
	)
{
	rtw_write8(Adapter,REG_RD_CTRL,0xFF);
	rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
	rtw_write8(Adapter,REG_RD_RESP_PKT_TH,0x05);
}

static VOID
_InitRxSetting_8812AU(
	IN	PADAPTER Adapter
	)
{
	rtw_write32(Adapter, REG_MACID, 0x87654321);
	rtw_write32(Adapter, 0x0700, 0x87654321);
}

static VOID
_InitRetryFunction_8812A(
	IN  PADAPTER Adapter
	)
{
	u8	value8;
	
	value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
	value8 |= EN_AMPDU_RTY_NEW;
	rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);

	// Set ACK timeout
	//rtw_write8(Adapter, REG_ACKTO, 0x40);  //masked by page for BCM IOT issue temporally
	rtw_write8(Adapter, REG_ACKTO, 0x80);
}

/*-----------------------------------------------------------------------------
 * Function:	usb_AggSettingTxUpdate()
 *
 * Overview:	Seperate TX/RX parameters update independent for TP detection and 
 *			dynamic TX/RX aggreagtion parameters update.
 *
 * Input:			PADAPTER
 *
 * Output/Return:	NONE
 *
 * Revised History:
 *	When		Who		Remark
 *	12/10/2010	MHC		Seperate to smaller function.
 *
 *---------------------------------------------------------------------------*/
static VOID
usb_AggSettingTxUpdate_8812A(
	IN	PADAPTER			Adapter
	)
{
#ifdef CONFIG_USB_TX_AGGREGATION
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	u32			value32;

	if(Adapter->registrypriv.wifi_spec)
		pHalData->UsbTxAggMode = _FALSE;

	if(pHalData->UsbTxAggMode){
		value32 = rtw_read32(Adapter, REG_TDECTRL);
		value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
		value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
		
		rtw_write32(Adapter, REG_TDECTRL, value32);
	}
	
#endif
}	// usb_AggSettingTxUpdate


/*-----------------------------------------------------------------------------
 * Function:	usb_AggSettingRxUpdate()
 *
 * Overview:	Seperate TX/RX parameters update independent for TP detection and 
 *			dynamic TX/RX aggreagtion parameters update.
 *
 * Input:			PADAPTER
 *
 * Output/Return:	NONE
 *
 * Revised History:
 *	When		Who		Remark
 *	12/10/2010	MHC		Seperate to smaller function.
 *
 *---------------------------------------------------------------------------*/
static VOID
usb_AggSettingRxUpdate_8812A(
	IN	PADAPTER			Adapter
	)
{
#ifdef CONFIG_USB_RX_AGGREGATION
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	u8			valueDMA;
	u8			valueUSB;

	valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);

	switch(pHalData->UsbRxAggMode)
	{
		case USB_RX_AGG_DMA:
			valueDMA |= RXDMA_AGG_EN;
			
			//rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, 0x05); //dma agg mode, 20k
			//
			// 2012/10/26 MH For TX throught start rate temp fix.
			//
			{
				u16			temp;

				//Adjust DMA page and thresh.
				temp = pHalData->RegAcUsbDmaSize | (pHalData->RegAcUsbDmaTime<<8);
				rtw_write16(Adapter, REG_RXDMA_AGG_PG_TH, temp); 
			}
			break;
		case USB_RX_AGG_USB:
		case USB_RX_AGG_MIX:
		case USB_RX_AGG_DISABLE:
		default:
			// TODO: 
			break;
	}

	rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
#endif
}	// usb_AggSettingRxUpdate

static VOID
init_UsbAggregationSetting_8812A(
	IN  PADAPTER Adapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);

	// Tx aggregation setting
	usb_AggSettingTxUpdate_8812A(Adapter);

	// Rx aggregation setting
	usb_AggSettingRxUpdate_8812A(Adapter);

	// 201/12/10 MH Add for USB agg mode dynamic switch.
	pHalData->UsbRxHighSpeedMode = _FALSE;
}

/*-----------------------------------------------------------------------------
 * Function:	USB_AggModeSwitch()
 *
 * Overview:	When RX traffic is more than 40M, we need to adjust some parameters to increase
 *			RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
 *			need to monitor the influence of FTP/network share.
 *			For TX mode, we are still ubder investigation.
 *
 * Input:		PADAPTER
 *
 * Output:		NONE
 *
 * Return:		NONE
 *
 * Revised History:
 *	When		Who		Remark
 *	12/10/2010	MHC		Create Version 0.  
 *
 *---------------------------------------------------------------------------*/
VOID
USB_AggModeSwitch(
	IN	PADAPTER			Adapter
	)
{
#if 0
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);

	//pHalData->UsbRxHighSpeedMode = FALSE;
	// How to measure the RX speed? We assume that when traffic is more than 
	if (pMgntInfo->bRegAggDMEnable == FALSE)
	{
		return;	// Inf not support.
	}
	
	
	if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE && 
		pHalData->UsbRxHighSpeedMode == FALSE)
	{
		pHalData->UsbRxHighSpeedMode = TRUE;
		RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to HIGH\n"));
	}
	else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE && 
		pHalData->UsbRxHighSpeedMode == TRUE)
	{
		pHalData->UsbRxHighSpeedMode = FALSE;
		RT_TRACE(COMP_INIT, DBG_LOUD, ("UsbAggModeSwitchCheck to LOW\n"));
	}
	else
	{
		return; 
	}
	

#if USB_RX_AGGREGATION_92C
	if (pHalData->UsbRxHighSpeedMode == TRUE)	
	{
		// 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator.
		// USB mode
#if (RT_PLATFORM == PLATFORM_LINUX)
		if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic)
		{
			pHalData->RxAggBlockCount	= 16;
			pHalData->RxAggBlockTimeout	= 7;
		}
		else
#endif
		{
			pHalData->RxAggBlockCount	= 40;
			pHalData->RxAggBlockTimeout	= 5;
		}
		// Mix mode
		pHalData->RxAggPageCount	= 72;
		pHalData->RxAggPageTimeout	= 6;		
	}
	else
	{
		// USB mode
		pHalData->RxAggBlockCount	= pMgntInfo->RegRxAggBlockCount;
		pHalData->RxAggBlockTimeout	= pMgntInfo->RegRxAggBlockTimeout;	
		// Mix mode
		pHalData->RxAggPageCount		= pMgntInfo->RegRxAggPageCount;
		pHalData->RxAggPageTimeout	= pMgntInfo->RegRxAggPageTimeout;	
	}

	if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT)
		pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT;
#if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX)	// do not support WINXP to prevent usbehci.sys BSOD
	if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter))
	{
		//
		// 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test
		// with the aggregation dynamic change!! We need to disable the function to prevent it is broken
		// in usbehci.sys.
		//
		usb_AggSettingRxUpdate_8188E(Adapter);

		// 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse
		// there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the 
		// issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may
		// BSOD.
	}
#endif
	
#endif
#endif
}	// USB_AggModeSwitch

static VOID
_InitOperationMode_8812A(
	IN	PADAPTER			Adapter
	)
{
#if 0//gtest
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	u1Byte				regBwOpMode = 0;
	u4Byte				regRATR = 0, regRRSR = 0;


	//1 This part need to modified according to the rate set we filtered!!
	//
	// Set RRSR, RATR, and REG_BWOPMODE registers
	//
	switch(Adapter->RegWirelessMode)
	{
		case WIRELESS_MODE_B:
			regBwOpMode = BW_OPMODE_20MHZ;
			regRATR = RATE_ALL_CCK;
			regRRSR = RATE_ALL_CCK;
			break;
		case WIRELESS_MODE_A:
			regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
			regRATR = RATE_ALL_OFDM_AG;
			regRRSR = RATE_ALL_OFDM_AG;
			break;
		case WIRELESS_MODE_G:
			regBwOpMode = BW_OPMODE_20MHZ;
			regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			break;
		case WIRELESS_MODE_AUTO:
			if (Adapter->bInHctTest)
			{
			    regBwOpMode = BW_OPMODE_20MHZ;
			    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			}
			else
			{
			    regBwOpMode = BW_OPMODE_20MHZ;
			    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
			    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			}
			break;
		case WIRELESS_MODE_N_24G:
			// It support CCK rate by default.
			// CCK rate will be filtered out only when associated AP does not support it.
			regBwOpMode = BW_OPMODE_20MHZ;
				regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
				regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
			break;
		case WIRELESS_MODE_N_5G:
			regBwOpMode = BW_OPMODE_5G;
			regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
			regRRSR = RATE_ALL_OFDM_AG;
			break;
			
		default: //for MacOSX compiler warning.
			break;
	}

	// Ziv ????????
	//PlatformEFIOWrite4Byte(Adapter, REG_INIRTS_RATE_SEL, regRRSR);
	PlatformEFIOWrite1Byte(Adapter, REG_BWOPMODE, regBwOpMode);
#endif
}


// Set CCK and OFDM Block "ON"
static VOID _BBTurnOnBlock(
	IN	PADAPTER		Adapter
	)
{
#if (DISABLE_BB_RF)
	return;
#endif

	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}

static VOID _RfPowerSave(
	IN	PADAPTER		Adapter
	)
{
#if 0
	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
	PMGNT_INFO		pMgntInfo	= &(Adapter->MgntInfo);
	u1Byte			eRFPath;

#if (DISABLE_BB_RF)
	return;
#endif

	if(pMgntInfo->RegRfOff == TRUE){ // User disable RF via registry.
		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RegRfOff.\n"));
		MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
		// Those action will be discard in MgntActSet_RF_State because off the same state
		for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
			PHY_SetRFReg(Adapter, eRFPath, 0x4, 0xC00, 0x0);
	}
	else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS){ // H/W or S/W RF OFF before sleep.
		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RfOffReason(%ld).\n", pMgntInfo->RfOffReason));
		MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
	}
	else{
		pHalData->eRFPowerState = eRfOn;
		pMgntInfo->RfOffReason = 0; 
		if(Adapter->bInSetPower || Adapter->bResetInProgress)
			PlatformUsbEnableInPipes(Adapter);
		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): RF is on.\n"));
	}
#endif
}

enum {
	Antenna_Lfet = 1,
	Antenna_Right = 2,	
};

static VOID
_InitAntenna_Selection_8812A(IN	PADAPTER Adapter)
{

	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);

	if(pHalData->AntDivCfg==0)
		return;
	DBG_8192C("==>  %s ....\n",__FUNCTION__);		

	rtw_write8(Adapter, REG_LEDCFG2, 0x82);

	PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
		
	if(PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == MAIN_ANT)
		pHalData->CurAntenna = MAIN_ANT;
	else
		pHalData->CurAntenna = AUX_ANT;
	DBG_8192C("%s,Cur_ant:(%x)%s\n",__FUNCTION__,pHalData->CurAntenna,(pHalData->CurAntenna == MAIN_ANT)?"MAIN_ANT":"AUX_ANT");
			

}

//
// 2010/08/26 MH Add for selective suspend mode check.
// If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
// slim card.
//
static VOID
HalDetectSelectiveSuspendMode(
	IN PADAPTER				Adapter
	)
{
#if 0
	u8	tmpvalue;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(Adapter);

	// If support HW radio detect, we need to enable WOL ability, otherwise, we 
	// can not use FW to notify host the power state switch.
	
	EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);

	DBG_8192C("HalDetectSelectiveSuspendMode(): SS ");
	if(tmpvalue & BIT1)
	{
		DBG_8192C("Enable\n");
	}
	else
	{
		DBG_8192C("Disable\n");
		pdvobjpriv->RegUsbSS = _FALSE;
	}

	// 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode.
	if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData))
	{
		//PMGNT_INFO				pMgntInfo = &(Adapter->MgntInfo);

		//if (!pMgntInfo->bRegDongleSS)	
		//{
		//	RT_TRACE(COMP_INIT, DBG_LOUD, ("Dongle disable SS\n"));
			pdvobjpriv->RegUsbSS = _FALSE;
		//}
	}
#endif
}	// HalDetectSelectiveSuspendMode
/*-----------------------------------------------------------------------------
 * Function:	HwSuspendModeEnable92Cu()
 *
 * Overview:	HW suspend mode switch.
 *
 * Input:		NONE
 *
 * Output:	NONE
 *
 * Return:	NONE
 *
 * Revised History:
 *	When		Who		Remark
 *	08/23/2010	MHC		HW suspend mode switch test..
 *---------------------------------------------------------------------------*/
static VOID 
HwSuspendModeEnable_8812AU(
	IN	PADAPTER	pAdapter,
	IN	u8			Type
	)
{
	//PRT_USB_DEVICE 		pDevice = GET_RT_USB_DEVICE(pAdapter);
	u16	reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG);	

	//if (!pDevice->RegUsbSS)
	{
		return;
	}

	//
	// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW
	// to enter suspend mode automatically. Otherwise, it will shut down major power 
	// domain and 8051 will stop. When we try to enter selective suspend mode, we
	// need to prevent HW to enter D2 mode aumotmatically. Another way, Host will
	// issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli).
	// We need to enable HW suspend mode when enter S3/S4 or disable. We need 
	// to disable HW suspend mode for IPS/radio_off.
	//
	//RT_TRACE(COMP_RF, DBG_LOUD, ("HwSuspendModeEnable92Cu = %d\n", Type));
	if (Type == _FALSE)
	{
		reg |= BIT14;
		//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
		reg |= BIT12;
		//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
	}
	else
	{
		reg &= (~BIT12);
		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
		reg &= (~BIT14);
		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
	}
	
}	// HwSuspendModeEnable92Cu
rt_rf_power_state RfOnOffDetect(IN	PADAPTER pAdapter )
{
	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(pAdapter);
	u8	val8;
	rt_rf_power_state rfpowerstate = rf_off;

	if(pAdapter->pwrctrlpriv.bHWPowerdown)
	{
		val8 = rtw_read8(pAdapter, REG_HSISR);
		DBG_8192C("pwrdown, 0x5c(BIT7)=%02x\n", val8);
		rfpowerstate = (val8 & BIT7) ? rf_off: rf_on;				
	}
	else // rf on/off
	{
		rtw_write8(	pAdapter, REG_MAC_PINMUX_CFG,rtw_read8(pAdapter, REG_MAC_PINMUX_CFG)&~(BIT3));
		val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
		DBG_8192C("GPIO_IN=%02x\n", val8);
		rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;	
	}
	return rfpowerstate;
}	// HalDetectPwrDownMode

void _ps_open_RF(_adapter *padapter) {
	//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
	//phy_SsPwrSwitch92CU(padapter, rf_on, 1);
}

void _ps_close_RF(_adapter *padapter){
	//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
	//phy_SsPwrSwitch92CU(padapter, rf_off, 1);
}

u32 rtl8812au_hal_init(PADAPTER Adapter)
{
	u8	value8 = 0, u1bRegCR;
	u16  value16;
	u8	txpktbuf_bndy;
	u32	status = _SUCCESS;
	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
	struct pwrctrl_priv		*pwrctrlpriv = &Adapter->pwrctrlpriv;
	struct registry_priv	*pregistrypriv = &Adapter->registrypriv;
	
	rt_rf_power_state		eRfPowerStateToSet;
#ifdef CONFIG_BT_COEXIST
	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
#endif

	u32 init_start_time = rtw_get_current_time();


#ifdef DBG_HAL_INIT_PROFILING

	enum HAL_INIT_STAGES {
		HAL_INIT_STAGES_BEGIN = 0,
		HAL_INIT_STAGES_INIT_PW_ON,
		HAL_INIT_STAGES_INIT_LLTT,
		HAL_INIT_STAGES_DOWNLOAD_FW,
		HAL_INIT_STAGES_MAC,
		HAL_INIT_STAGES_MISC01,
		HAL_INIT_STAGES_MISC02,
		HAL_INIT_STAGES_BB,
		HAL_INIT_STAGES_RF,
		HAL_INIT_STAGES_TURN_ON_BLOCK,
		HAL_INIT_STAGES_INIT_SECURITY,
		HAL_INIT_STAGES_MISC11,
		HAL_INIT_STAGES_INIT_HAL_DM,
		//HAL_INIT_STAGES_RF_PS,
		HAL_INIT_STAGES_IQK,
		HAL_INIT_STAGES_PW_TRACK,
		HAL_INIT_STAGES_LCK,
		HAL_INIT_STAGES_MISC21,
		//HAL_INIT_STAGES_INIT_PABIAS,
		#ifdef CONFIG_BT_COEXIST
		HAL_INIT_STAGES_BT_COEXIST,
		#endif
		//HAL_INIT_STAGES_ANTENNA_SEL,
		HAL_INIT_STAGES_MISC31,
		HAL_INIT_STAGES_END,
		HAL_INIT_STAGES_NUM
	};

	char * hal_init_stages_str[] = {
		"HAL_INIT_STAGES_BEGIN",
		"HAL_INIT_STAGES_INIT_PW_ON",
		"HAL_INIT_STAGES_INIT_LLTT",
		"HAL_INIT_STAGES_DOWNLOAD_FW",
		"HAL_INIT_STAGES_MAC",
		"HAL_INIT_STAGES_MISC01",
		"HAL_INIT_STAGES_MISC02",
		"HAL_INIT_STAGES_BB",
		"HAL_INIT_STAGES_RF",
		"HAL_INIT_STAGES_TURN_ON_BLOCK",
		"HAL_INIT_STAGES_INIT_SECURITY",
		"HAL_INIT_STAGES_MISC11",
		"HAL_INIT_STAGES_INIT_HAL_DM",
		//"HAL_INIT_STAGES_RF_PS",
		"HAL_INIT_STAGES_IQK",
		"HAL_INIT_STAGES_PW_TRACK",
		"HAL_INIT_STAGES_LCK",
		"HAL_INIT_STAGES_MISC21",
		#ifdef CONFIG_BT_COEXIST
		"HAL_INIT_STAGES_BT_COEXIST",
		#endif
		//"HAL_INIT_STAGES_ANTENNA_SEL",
		"HAL_INIT_STAGES_MISC31",
		"HAL_INIT_STAGES_END",
	};

	int hal_init_profiling_i;
	u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; //used to record the time of each stage's starting point

	for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM;hal_init_profiling_i++)
		hal_init_stages_timestamp[hal_init_profiling_i]=0;

	#define HAL_INIT_PROFILE_TAG(stage) hal_init_stages_timestamp[(stage)]=rtw_get_current_time();
#else
	#define HAL_INIT_PROFILE_TAG(stage) do {} while(0)
#endif //DBG_HAL_INIT_PROFILING



_func_enter_;
	
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
	if(Adapter->pwrctrlpriv.bkeepfwalive)
	{
		_ps_open_RF(Adapter);

		if(pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized){
			//PHY_IQCalibrate_8812A(Adapter,_TRUE);
		}
		else
		{
			//PHY_IQCalibrate_8812A(Adapter,_FALSE);
			pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = _TRUE;
		}

		//ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
		//PHY_LCCalibrate_8812A(Adapter);

		goto exit;
	}

	// Check if MAC has already power on. by tynli. 2011.05.27.
	value8 = rtw_read8(Adapter, REG_SYS_CLKR+1);	
	u1bRegCR = PlatformEFIORead1Byte(Adapter, REG_CR);
	DBG_871X(" power-on :REG_SYS_CLKR 0x09=0x%02x. REG_CR 0x100=0x%02x.\n", value8, u1bRegCR);
	if((value8&BIT3)  && (u1bRegCR != 0 && u1bRegCR != 0xEA))
	{
		//pHalData->bMACFuncEnable = TRUE;
		DBG_871X(" MAC has already power on.\n");
	}
	else
	{
		//pHalData->bMACFuncEnable = FALSE;
		// Set FwPSState to ALL_ON mode to prevent from the I/O be return because of 32k
		// state which is set before sleep under wowlan mode. 2012.01.04. by tynli.
		//pHalData->FwPSState = FW_PS_STATE_ALL_ON_88E;
		DBG_871X(" MAC has not been powered on yet.\n");
	}

	//
	// 2012/11/13 MH Revise for U2/U3 switch we can not update RF-A/B reset.
	// After discuss with BB team YN, reset after MAC power on to prevent RF
	// R/W error. Is it a right method?
	//
	if(!IS_HARDWARE_TYPE_8821(Adapter))
	{
		rtw_write8(Adapter, REG_RF_CTRL, 5);
		rtw_write8(Adapter, REG_RF_CTRL, 7);
		rtw_write8(Adapter, REG_RF_B_CTRL_8812, 5);
		rtw_write8(Adapter, REG_RF_B_CTRL_8812, 7);
	}

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
	status = _InitPowerOn8812AU(Adapter);
	if(status == _FAIL){
		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
		goto exit;
	}

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
	if (!pregistrypriv->wifi_spec) {
		if(IS_HARDWARE_TYPE_8812(Adapter))
			txpktbuf_bndy = TX_PAGE_BOUNDARY_8812;
		else
			txpktbuf_bndy = TX_PAGE_BOUNDARY_8821;
	} else {
		// for WMM
		if(IS_HARDWARE_TYPE_8812(Adapter))
			txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8812;
		else
			txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_8821;
	}
	
	status =  InitLLTTable8812(Adapter, txpktbuf_bndy);
	if(status == _FAIL){
		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
		goto exit;
	}

#if ENABLE_USB_DROP_INCORRECT_OUT
	_InitHardwareDropIncorrectBulkOut_8812A(Adapter);
#endif

	if(pHalData->bRDGEnable){
		_InitRDGSetting_8812A(Adapter);
	}

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
#if (MP_DRIVER == 1)
	if (Adapter->registrypriv.mp_mode == 1)
	{
		_InitRxSetting_8812AU(Adapter);
	}
#endif  //MP_DRIVER == 1
	{
		status = FirmwareDownload8812(Adapter, _FALSE);
		if (status != _SUCCESS) {
			DBG_871X("%s: Download Firmware failed!!\n", __FUNCTION__);
			Adapter->bFWReady = _FALSE;
			pHalData->fw_ractrl = _FALSE;
			//return status;
		} else {
			DBG_871X("%s: Download Firmware Success!!\n",__FUNCTION__);
			Adapter->bFWReady = _TRUE;
			pHalData->fw_ractrl = _TRUE;
		}
	}


	InitializeFirmwareVars8812(Adapter);
	
	if(pwrctrlpriv->reg_rfoff == _TRUE){
		pwrctrlpriv->rf_pwrstate = rf_off;
	}

	// 2010/08/09 MH We need to check if we need to turnon or off RF after detecting
	// HW GPIO pin. Before PHY_RFConfig8192C.
	//HalDetectPwrDownMode(Adapter);
	// 2010/08/26 MH If Efuse does not support sective suspend then disable the function.
	//HalDetectSelectiveSuspendMode(Adapter);

	// Save target channel
	// <Roger_Notes> Current Channel will be updated again later.
	pHalData->CurrentChannel = 0;//set 0 to trigger switch correct channel

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
#if (HAL_MAC_ENABLE == 1)
	status = PHY_MACConfig8812(Adapter);
	if(status == _FAIL)
	{
		goto exit;
	}
#endif
	
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
	if(IS_HARDWARE_TYPE_8812(Adapter))
	{
		_InitQueueReservedPage_8812AUsb(Adapter);
		_InitTxBufferBoundary_8812AUsb(Adapter);		
	}	
	else if(IS_HARDWARE_TYPE_8821(Adapter))
	{
		_InitQueueReservedPage_8821AUsb(Adapter);
		_InitTxBufferBoundary_8821AUsb(Adapter);	
	}		
	
	_InitQueuePriority_8812AUsb(Adapter);
	_InitPageBoundary_8812AUsb(Adapter);	

	if(IS_HARDWARE_TYPE_8812(Adapter))
		_InitTransferPageSize_8812AUsb(Adapter);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
	// Get Rx PHY status in order to report RSSI and others.
	_InitDriverInfoSize_8812A(Adapter, DRVINFO_SZ);

	_InitInterrupt_8812AU(Adapter);
	_InitID_8812A(Adapter);//set mac_address
	_InitNetworkType_8812A(Adapter);//set msr	
	_InitWMACSetting_8812A(Adapter);
	_InitAdaptiveCtrl_8812AUsb(Adapter);
	_InitEDCA_8812AUsb(Adapter);

	_InitRetryFunction_8812A(Adapter);
	init_UsbAggregationSetting_8812A(Adapter);
	_InitOperationMode_8812A(Adapter);//todo
	_InitBeaconParameters_8812A(Adapter);
	_InitBeaconMaxError_8812A(Adapter, _TRUE);

	_InitBurstPktLen(Adapter);  //added by page. 20110919

	//
	// Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch
	// Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. 
	// 2011.08.05. by tynli.
	//
	value8 = rtw_read8(Adapter, REG_CR);
	rtw_write8(Adapter, REG_CR, (value8|MACTXEN|MACRXEN));

#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI)

#ifdef CONFIG_CHECK_AC_LIFETIME
	// Enable lifetime check for the four ACs
	rtw_write8(Adapter, REG_LIFETIME_CTRL, 0x0F);
#endif	// CONFIG_CHECK_AC_LIFETIME

#ifdef CONFIG_TX_MCAST2UNI
	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400);	// unit: 256us. 256ms
	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400);	// unit: 256us. 256ms
#else	// CONFIG_TX_MCAST2UNI
	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000);	// unit: 256us. 3s
	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000);	// unit: 256us. 3s
#endif	// CONFIG_TX_MCAST2UNI
#endif	// CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI
	

#ifdef CONFIG_LED
	_InitHWLed(Adapter);
#endif //CONFIG_LED

	//
	//d. Initialize BB related configurations.
	//

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
#if (HAL_BB_ENABLE == 1)
	status = PHY_BBConfig8812(Adapter);
	if(status == _FAIL)
	{
		goto exit;
	}
#endif

	// 92CU use 3-wire to r/w RF
	//pHalData->Rf_Mode = RF_OP_By_SW_3wire;

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
#if (HAL_RF_ENABLE == 1)
	status = PHY_RFConfig8812(Adapter);	
	if(status == _FAIL)
	{
		goto exit;
	}

	if(pHalData->rf_type == RF_1T1R && IS_HARDWARE_TYPE_8812AU(Adapter))
		PHY_BB8812_Config_1T(Adapter);
#endif

	if(Adapter->registrypriv.channel <= 14)
		PHY_SwitchWirelessBand8812(Adapter, BAND_ON_2_4G);
	else
		PHY_SwitchWirelessBand8812(Adapter, BAND_ON_5G);

	rtw_hal_set_chnl_bw(Adapter, Adapter->registrypriv.channel, 
		CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
	invalidate_cam_all(Adapter);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
	_InitAntenna_Selection_8812A(Adapter);

	// HW SEQ CTRL
	//set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM.
	rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF); 
	
	// 
	// Disable BAR, suggested by Scott
	// 2010.04.09 add by hpfan
	//
	rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);

	if(pregistrypriv->wifi_spec)
		rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0);

	//Nav limit , suggest by scott
	rtw_write8(Adapter, 0x652, 0x0);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
	rtl8812_InitHalDm(Adapter);
	
#if (MP_DRIVER == 1)
	if (Adapter->registrypriv.mp_mode == 1)
	{
		Adapter->mppriv.channel = pHalData->CurrentChannel;
		MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
	}
	else	
#endif  //#if (MP_DRIVER == 1)
	{
	//
	// 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status
	// and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not 
	// call init_adapter. May cause some problem??
	//
	// Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed 
	// in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState 
	// is the same as eRfOff, we should change it to eRfOn after we config RF parameters.
	// Added by tynli. 2010.03.30.
	pwrctrlpriv->rf_pwrstate = rf_on;

#if 0  //to do
	RT_CLEAR_PS_LEVEL(pwrctrlpriv, RT_RF_OFF_LEVL_HALT_NIC);
#if 1 //Todo
	// 20100326 Joseph: Copy from GPIOChangeRFWorkItemCallBack() function to check HW radio on/off.
	// 20100329 Joseph: Revise and integrate the HW/SW radio off code in initialization.

	eRfPowerStateToSet = (rt_rf_power_state) RfOnOffDetect(Adapter);
	pwrctrlpriv->rfoff_reason |= eRfPowerStateToSet==rf_on ? RF_CHANGE_BY_INIT : RF_CHANGE_BY_HW;
	pwrctrlpriv->rfoff_reason |= (pwrctrlpriv->reg_rfoff) ? RF_CHANGE_BY_SW : 0;

	if(pwrctrlpriv->rfoff_reason&RF_CHANGE_BY_HW)
		pwrctrlpriv->b_hw_radio_off = _TRUE;

	DBG_8192C("eRfPowerStateToSet=%d\n", eRfPowerStateToSet);
	
	if(pwrctrlpriv->reg_rfoff == _TRUE)
	{	// User disable RF via registry.
		DBG_8192C("InitializeAdapter8192CU(): Turn off RF for RegRfOff.\n");
		//MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_SW, _TRUE);
		
		// Those action will be discard in MgntActSet_RF_State because off the same state
		//for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
			//PHY_SetRFReg(Adapter, eRFPath, 0x4, 0xC00, 0x0);
	}
	else if(pwrctrlpriv->rfoff_reason > RF_CHANGE_BY_PS)
	{	// H/W or S/W RF OFF before sleep.
		DBG_8192C(" Turn off RF for RfOffReason(%x) ----------\n", pwrctrlpriv->rfoff_reason);
		//pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT;
		pwrctrlpriv->rf_pwrstate = rf_on;
		//MgntActSet_RF_State(Adapter, rf_off, pwrctrlpriv->rfoff_reason, _TRUE);
	}
	else
	{
		// Perform GPIO polling to find out current RF state. added by Roger, 2010.04.09.
		if(pHalData->BoardType == BOARD_MINICARD /*&& (Adapter->MgntInfo.PowerSaveControl.bGpioRfSw)*/)
		{
			DBG_8192C("InitializeAdapter8192CU(): RF=%d \n", eRfPowerStateToSet);
			if (eRfPowerStateToSet == rf_off)
			{				
				//MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_HW, _TRUE);
				pwrctrlpriv->b_hw_radio_off = _TRUE;	
			}
			else
			{
				pwrctrlpriv->rf_pwrstate = rf_off;
				pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; 
				pwrctrlpriv->b_hw_radio_off = _FALSE;					
				//MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE);
			}
		}	
		else
		{
			pwrctrlpriv->rf_pwrstate = rf_off;
			pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; 			
			//MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE);
		}
	
		pwrctrlpriv->rfoff_reason = 0; 
		pwrctrlpriv->b_hw_radio_off = _FALSE;
		pwrctrlpriv->rf_pwrstate = rf_on;
		rtw_led_control(Adapter, LED_CTL_POWER_ON);

	}

	// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
	// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
	if(pHalData->pwrdown && eRfPowerStateToSet == rf_off)
	{
		// Enable register area 0x0-0xc.
		rtw_write8(Adapter, REG_RSV_CTRL, 0x0);

		//
		// <Roger_Notes> We should configure HW PDn source for WiFi ONLY, and then
		// our HW will be set in power-down mode if PDn source from all  functions are configured.
		// 2010.10.06.
		//
		//if(IS_HARDWARE_TYPE_8723AU(Adapter))
		//{			
		//	u1bTmp = rtw_read8(Adapter, REG_MULTI_FUNC_CTRL);
		//	rtw_write8(Adapter, REG_MULTI_FUNC_CTRL, (u1bTmp|WL_HWPDN_EN));
		//}
		//else
		//{
			rtw_write16(Adapter, REG_APS_FSMCO, 0x8812);
		//}
	}
	//DrvIFIndicateCurrentPhyStatus(Adapter); // 2010/08/17 MH Disable to prevent BSOD.
#endif
#endif

	//0x4c6[3] 1: RTS BW = Data BW
	//0: RTS BW depends on CCA / secondary CCA result.
	rtw_write8(Adapter, REG_QUEUE_CTRL, rtw_read8(Adapter, REG_QUEUE_CTRL)&0xF7);

	// enable Tx report.
	rtw_write8(Adapter,  REG_FWHW_TXQ_CTRL+1, 0x0F);

	// Suggested by SD1 pisa. Added by tynli. 2011.10.21.
	rtw_write8(Adapter, REG_EARLY_MODE_CONTROL_8812+3, 0x01);//Pretx_en, for WEP/TKIP SEC

	//tynli_test_tx_report.
	rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);

	// Reset USB mode switch setting
	rtw_write8(Adapter, REG_SDIO_CTRL_8812, 0x0);
	rtw_write8(Adapter, REG_ACLK_MON, 0x0);
	
	//RT_TRACE(COMP_INIT, DBG_TRACE, ("InitializeAdapter8188EUsb() <====\n"));
	
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
	// 2010/08/26 MH Merge from 8192CE.
	if(pwrctrlpriv->rf_pwrstate == rf_on)
	{
		if(IS_HARDWARE_TYPE_8812AU(Adapter))
		{
#if (RTL8812A_SUPPORT == 1)
			pHalData->odmpriv.RFCalibrateInfo.bNeedIQK = _TRUE;
			if(pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized)
				PHY_IQCalibrate_8812A(Adapter, _TRUE);
			else
			{
				PHY_IQCalibrate_8812A(Adapter, _FALSE);
				pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = _TRUE;
			}
#endif
		}
		
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
		
		//ODM_TXPowerTrackingCheck(&pHalData->odmpriv );
		

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
		//PHY_LCCalibrate_8812A(Adapter);
	}
}

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);


//HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
//	_InitPABias(Adapter);

#ifdef CONFIG_BT_COEXIST
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST);
	//_InitBTCoexist(Adapter);
#endif

	// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter
	// suspend mode automatically.
	//HwSuspendModeEnable92Cu(Adapter, _FALSE);

HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31);

	rtw_write8(Adapter, REG_USB_HRPWM, 0);

	//misc
	{
		int i;		
		u8 mac_addr[6];
		for(i=0; i<6; i++)
		{			
#ifdef CONFIG_CONCURRENT_MODE
			if(Adapter->iface_type == IFACE_PORT1)
				mac_addr[i] = rtw_read8(Adapter, REG_MACID1+i);
			else
#endif
			mac_addr[i] = rtw_read8(Adapter, REG_MACID+i);		
		}
		
		DBG_8192C("MAC Address from REG_MACID = "MAC_FMT"\n", MAC_ARG(mac_addr));
	}

exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);

	DBG_871X("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));

	#ifdef DBG_HAL_INIT_PROFILING
	hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time();

	for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM-1;hal_init_profiling_i++) {
		DBG_871X("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n"
			, hal_init_stages_str[hal_init_profiling_i]
			, hal_init_stages_timestamp[hal_init_profiling_i]
			, (hal_init_stages_timestamp[hal_init_profiling_i+1]-hal_init_stages_timestamp[hal_init_profiling_i])
			, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i+1])
		);
	}	
	#endif


_func_exit_;

	return status;
}

VOID
CardDisableRTL8812AU(
	IN	PADAPTER			Adapter 
)
{
	u8	u1bTmp;
	u8 	val8;
	u16	val16;
	u32	val32;
	

	//DBG_871X("CardDisableRTL8188EU\n");

	//Stop Tx Report Timer. 0x4EC[Bit1]=b'0
	u1bTmp = rtw_read8(Adapter, REG_TX_RPT_CTRL);
	rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));

	// stop rx 
	rtw_write8(Adapter, REG_CR, 0x0);
	
	// Run LPS WL RFOFF flow
	if(IS_HARDWARE_TYPE_8821U(Adapter))		
		HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_LPS_ENTER_FLOW);
	else	
		HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_LPS_ENTER_FLOW);

	if((rtw_read8(Adapter, REG_MCUFWDL)&RAM_DL_SEL) && 
		Adapter->bFWReady) //8051 RAM code
	{
		_8051Reset8812(Adapter);
	}	

	// Reset MCU. Suggested by Filen. 2011.01.26. by tynli.
	u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
	rtw_write8(Adapter, REG_SYS_FUNC_EN+1, (u1bTmp&(~BIT2)));

	// MCUFWDL 0x80[1:0]=0				// reset MCU ready status
	rtw_write8(Adapter, REG_MCUFWDL, 0x00);

	// Card disable power action flow
	if(IS_HARDWARE_TYPE_8821U(Adapter))
		HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8821A_NIC_DISABLE_FLOW);	
	else
		HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8812_NIC_DISABLE_FLOW);
}

static void rtl8812au_hw_power_down(_adapter *padapter)
{
	// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
	// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
		
	// Enable register area 0x0-0xc.
	rtw_write8(padapter,REG_RSV_CTRL, 0x0);			
	rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
}

u32 rtl8812au_hal_deinit(PADAPTER Adapter)
 {

	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
   	DBG_8192C("==> %s \n",__FUNCTION__);

#ifdef CONFIG_BT_COEXIST
	if (BT_IsBtExist(Adapter))
	{
		DBG_871X("BT module enable SIC\n");
		// Only under WIN7 we can support selective suspend and enter D3 state when system call halt adapter.

		//rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)|BIT12);
		// 2010/10/13 MH If we enable SIC in the position and then call _ResetDigitalProcedure1. in XP,
		// the system will hang due to 8051 reset fail.
	}
	else
#endif
	{
		rtw_write16(Adapter, REG_GPIO_MUXCFG, rtw_read16(Adapter, REG_GPIO_MUXCFG)&(~BIT12));
	}

	if(pHalData->bSupportUSB3 == _TRUE)
	{
		// set Reg 0xf008[3:4] to 2'11 to eable U1/U2 Mode in USB3.0. added by page, 20120712
		rtw_write8(Adapter, 0xf008, rtw_read8(Adapter, 0xf008)|0x18);
	}

	rtw_write32(Adapter, REG_HISR0_8812, 0xFFFFFFFF);
	rtw_write32(Adapter, REG_HISR1_8812, 0xFFFFFFFF);
	rtw_write32(Adapter, REG_HIMR0_8812, IMR_DISABLED_8812);
	rtw_write32(Adapter, REG_HIMR1_8812, IMR_DISABLED_8812);

 #ifdef SUPPORT_HW_RFOFF_DETECTED
 	DBG_8192C("bkeepfwalive(%x)\n",Adapter->pwrctrlpriv.bkeepfwalive);
 	if(Adapter->pwrctrlpriv.bkeepfwalive)
 	{
		_ps_close_RF(Adapter);		
		if((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown))		
			rtl8812au_hw_power_down(Adapter);
 	}
	else
#endif
	{	
		if(Adapter->hw_init_completed == _TRUE){
			CardDisableRTL8812AU(Adapter);

			if((Adapter->pwrctrlpriv.bHWPwrPindetect ) && (Adapter->pwrctrlpriv.bHWPowerdown))		
				rtl8812au_hw_power_down(Adapter);
		}
	}		
	return _SUCCESS;
 }


unsigned int rtl8812au_inirp_init(PADAPTER Adapter)
{	
	u8 i;	
	struct recv_buf *precvbuf;
	uint	status;
	struct dvobj_priv *pdev= adapter_to_dvobj(Adapter);
	struct intf_hdl * pintfhdl=&Adapter->iopriv.intf;
	struct recv_priv *precvpriv = &(Adapter->recvpriv);	
	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
	u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
#endif

_func_enter_;

	_read_port = pintfhdl->io_ops._read_port;

	status = _SUCCESS;

	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init \n"));	
		
	precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;

	//issue Rx irp to receive data	
	precvbuf = (struct recv_buf *)precvpriv->precv_buf;	
	for(i=0; i<NR_RECVBUFF; i++)
	{
		if(_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE )
		{
			RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error \n"));
			status = _FAIL;
			goto exit;
		}
		
		precvbuf++;		
		precvpriv->free_recv_buf_queue_cnt--;
	}

#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
	if(pHalData->RtIntInPipe != 0x05)
	{
		status = _FAIL;
		DBG_871X("%s =>Warning !! Have not USB Int-IN pipe,  pHalData->RtIntInPipe(%d)!!!\n",__FUNCTION__,pHalData->RtIntInPipe);
		goto exit;
	}	
	_read_interrupt = pintfhdl->io_ops._read_interrupt;
	if(_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE )
	{
		RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error \n"));
		status = _FAIL;
	}
#endif

exit:
	
	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("<=== usb_inirp_init \n"));

_func_exit_;

	return status;

}

unsigned int rtl8812au_inirp_deinit(PADAPTER Adapter)
{	
	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n ===> usb_rx_deinit \n"));
	
	rtw_read_port_cancel(Adapter);

	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n <=== usb_rx_deinit \n"));

	return _SUCCESS;
}

//-------------------------------------------------------------------
//
//	EEPROM/EFUSE Content Parsing
//
//-------------------------------------------------------------------
VOID
hal_ReadIDs_8812AU(
	IN	PADAPTER	Adapter,
	IN	pu1Byte		PROMContent,
	IN	BOOLEAN		AutoloadFail
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	EEPROM_EFUSE_PRIV	*pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);

	if( !AutoloadFail )
	{
		// VID, PID 
		if(IS_HARDWARE_TYPE_8812AU(Adapter))
		{
			pHalData->EEPROMVID = EF2Byte( *(u16 *)&PROMContent[EEPROM_VID_8812AU] );
			pHalData->EEPROMPID = EF2Byte( *(u16 *)&PROMContent[EEPROM_PID_8812AU] );		
		}
		else if (IS_HARDWARE_TYPE_8821U(Adapter))

		{
			pHalData->EEPROMVID = EF2Byte( *(u16 *)&PROMContent[EEPROM_VID_8821AU] );
			pHalData->EEPROMPID = EF2Byte( *(u16 *)&PROMContent[EEPROM_PID_8821AU] );		
		}

		
		// Customer ID, 0x00 and 0xff are reserved for Realtek. 		
		pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CustomID_8812];
		pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;

	}
	else
	{
		pHalData->EEPROMVID 			= EEPROM_Default_VID;
		pHalData->EEPROMPID 			= EEPROM_Default_PID;

		// Customer ID, 0x00 and 0xff are reserved for Realtek. 		
		pHalData->EEPROMCustomerID		= EEPROM_Default_CustomerID;
		pHalData->EEPROMSubCustomerID	= EEPROM_Default_SubCustomerID;

	}

	if((pHalData->EEPROMVID == 0x050D) && (pHalData->EEPROMPID == 0x1106))// SerComm for Belkin.
		pEEPROM->CustomerID = RT_CID_819x_Sercomm_Belkin;
	else if((pHalData->EEPROMVID == 0x0846) && (pHalData->EEPROMPID == 0x9051))// SerComm for Netgear.
		pEEPROM->CustomerID = RT_CID_819x_Sercomm_Netgear;
	else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330e))//add by ylb 20121012 for customer led for alpha
		pEEPROM->CustomerID = RT_CID_819x_ALPHA_Dlink;
	else if((pHalData->EEPROMVID == 0x0B05) && (pHalData->EEPROMPID == 0x17D2))//Edimax for ASUS
		pEEPROM->CustomerID = RT_CID_819x_Edimax_ASUS;
	
	DBG_871X("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID);
	DBG_871X("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID);
}

VOID
hal_ReadMACAddress_8812AU(
	IN	PADAPTER	Adapter,	
	IN	u8*			PROMContent,
	IN	BOOLEAN		AutoloadFail
	)
{
	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);

	if(_FALSE == AutoloadFail)  
	{
		if(IS_HARDWARE_TYPE_8812AU(Adapter))
		{
			//Read Permanent MAC address and set value to hardware
			_rtw_memcpy(pEEPROM->mac_addr, &PROMContent[EEPROM_MAC_ADDR_8812AU], ETH_ALEN);
		}
		else if(IS_HARDWARE_TYPE_8821U(Adapter))
		{
			//Read Permanent MAC address and set value to hardware
			_rtw_memcpy(pEEPROM->mac_addr, &PROMContent[EEPROM_MAC_ADDR_8821AU], ETH_ALEN);
		}
	}
	else
	{
		//Random assigh MAC address
		u8	sMacAddr[ETH_ALEN] = {0x00, 0xE0, 0x4C, 0x88, 0x12, 0x00};
		//sMacAddr[5] = (u8)GetRandomNumber(1, 254);
		_rtw_memcpy(pEEPROM->mac_addr, sMacAddr, ETH_ALEN);
	}

	DBG_8192C("%s MAC Address from EFUSE = "MAC_FMT"\n",__FUNCTION__, MAC_ARG(pEEPROM->mac_addr));
}

VOID
hal_InitPGData_8812A(
	IN	PADAPTER		padapter,
	IN	OUT	u8*			PROMContent
	)
{
	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
//	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	u32			i;
	u16			value16;

	if(_FALSE == pEEPROM->bautoload_fail_flag)
	{ // autoload OK.
		if (is_boot_from_eeprom(padapter))
		{
			// Read all Content from EEPROM or EFUSE.
			for(i = 0; i < HWSET_MAX_SIZE_JAGUAR; i += 2)
			{
				//value16 = EF2Byte(ReadEEprom(pAdapter, (u2Byte) (i>>1)));
				//*((u16*)(&PROMContent[i])) = value16;
			}
		}
		else
		{
			// Read EFUSE real map to shadow.
			EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
		}
	}
	else
	{//autoload fail
		RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n"));
		//pHalData->AutoloadFailFlag = _TRUE;
		//update to default value 0xFF
		if (!is_boot_from_eeprom(padapter))
			EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, _FALSE);
	}
}

VOID
hal_CustomizedBehavior_8812AU(
	IN	PADAPTER	Adapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);	
	EEPROM_EFUSE_PRIV	*pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
	struct led_priv	*pledpriv = &(Adapter->ledpriv);

	
	// Led mode
	switch(pEEPROM->CustomerID)
	{
		case RT_CID_DEFAULT:
			pledpriv->LedStrategy = SW_LED_MODE9;
			pledpriv->bRegUseLed = _TRUE;
			break;

		case RT_CID_819x_HP:
			pledpriv->LedStrategy = SW_LED_MODE6; // Customize Led mode
			break;

		case RT_CID_819x_Sercomm_Belkin:
			pledpriv->LedStrategy = SW_LED_MODE9;
			break;

		case RT_CID_819x_Sercomm_Netgear:
			pledpriv->LedStrategy = SW_LED_MODE10;
			break;

		case RT_CID_819x_ALPHA_Dlink://add by ylb 20121012 for customer led for alpha
			pledpriv->LedStrategy = SW_LED_MODE1;
			break;

		case RT_CID_819x_Edimax_ASUS:
			pledpriv->LedStrategy = SW_LED_MODE11;
			break;

		case RT_CID_WNC_NEC:
			pledpriv->LedStrategy = SW_LED_MODE12;	
			break;

		case RT_CID_NETGEAR:
			pledpriv->LedStrategy = SW_LED_MODE13;
			break;

		default:
			pledpriv->LedStrategy = SW_LED_MODE9;
			break;
	}

	pHalData->bLedOpenDrain = _TRUE;// Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
}

static void
hal_CustomizeByCustomerID_8812AU(
	IN	PADAPTER		pAdapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
	EEPROM_EFUSE_PRIV	*pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);

	// For customized behavior.
	if((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMPID == 0x1629))// HP Lite-On for RTL8188CUS Slim Combo.
		pEEPROM->CustomerID = RT_CID_819x_HP; 
	else if ((pHalData->EEPROMVID == 0x9846) && (pHalData->EEPROMPID == 0x9041))
		pEEPROM->CustomerID = RT_CID_NETGEAR;
	else if ((pHalData->EEPROMVID == 0x2019) && (pHalData->EEPROMPID == 0x1201))
		pEEPROM->CustomerID = RT_CID_PLANEX;
	else if((pHalData->EEPROMVID == 0x0BDA) &&(pHalData->EEPROMPID == 0x5088))
		pEEPROM->CustomerID = RT_CID_CC_C;
	
	DBG_871X("PID= 0x%x, VID=  %x\n",pHalData->EEPROMPID,pHalData->EEPROMVID);
	
	//	Decide CustomerID according to VID/DID or EEPROM
	switch(pHalData->EEPROMCustomerID)
	{
		case EEPROM_CID_DEFAULT:
			if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
				pEEPROM->CustomerID = RT_CID_DLINK;
			else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
				pEEPROM->CustomerID = RT_CID_DLINK;
			else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
				pEEPROM->CustomerID = RT_CID_DLINK;
			else if((pHalData->EEPROMVID == 0x0BFF) && (pHalData->EEPROMPID == 0x8160))
			{
				//pHalData->bAutoConnectEnable = _FALSE;
				pEEPROM->CustomerID = RT_CID_CHINA_MOBILE;
			}	
			else if((pHalData->EEPROMVID == 0x0BDA) &&	(pHalData->EEPROMPID == 0x5088))
				pEEPROM->CustomerID = RT_CID_CC_C;
			else if ((pHalData->EEPROMVID == 0x0846) &&(pHalData->EEPROMPID == 0x9052))
				pEEPROM->CustomerID = RT_CID_NETGEAR;
			DBG_871X("PID= 0x%x, VID=  %x\n",pHalData->EEPROMPID,pHalData->EEPROMVID);
			break;
		case EEPROM_CID_WHQL:
			//padapter->bInHctTest = TRUE;
	
			//pMgntInfo->bSupportTurboMode = FALSE;
			//pMgntInfo->bAutoTurboBy8186 = FALSE;
	
			//pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
			//pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
			//pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
			//pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE;
			//pMgntInfo->keepAliveLevel = 0;
	
			//padapter->bUnloadDriverwhenS3S4 = FALSE;
			break;			
		default:
			pEEPROM->CustomerID = RT_CID_DEFAULT;
			break;
			
	}
	DBG_871X("Customer ID: 0x%2x\n", pEEPROM->CustomerID);
	
	hal_CustomizedBehavior_8812AU(pAdapter);
}

VOID
hal_ReadUsbModeSwitch_8812AU(
	IN	PADAPTER	Adapter,
	IN	u8*			PROMContent,
	IN	BOOLEAN		AutoloadFail
	)
{
#if 0
	if(AutoloadFail)
	{
		UsbModeSwitch_SetUsbModeMechOn(Adapter, FALSE);
	}
	else
	{
		UsbModeSwitch_SetUsbModeMechOn(Adapter, ((PROMContent[8]&BIT1)>>1));
	}
#endif
}

static VOID
ReadLEDSetting_8812AU(
	IN	PADAPTER	Adapter,	
	IN	u8*		PROMContent,
	IN	BOOLEAN		AutoloadFail
	)
{
	struct led_priv *pledpriv = &(Adapter->ledpriv);

#ifdef CONFIG_SW_LED
	pledpriv->bRegUseLed = _TRUE;
#else // HW LED
	pledpriv->LedStrategy = HW_LED;
#endif //CONFIG_SW_LED
}

VOID
InitAdapterVariablesByPROM_8812AU(
	IN	PADAPTER	Adapter
	)
{
	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);

	hal_InitPGData_8812A(Adapter, pEEPROM->efuse_eeprom_data);
	Hal_EfuseParseIDCode8812A(Adapter, pEEPROM->efuse_eeprom_data);
	
	Hal_ReadPROMVersion8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	hal_ReadIDs_8812AU(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	hal_ReadMACAddress_8812AU(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);	
	Hal_ReadTxPowerInfo8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	Hal_ReadBoardType8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);

	//
	// Read Bluetooth co-exist and initialize
	//
	Hal_EfuseParseBTCoexistInfo8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	
	Hal_ReadChannelPlan8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	Hal_EfuseParseXtal_8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);	
	Hal_ReadThermalMeter_8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	Hal_ReadAntennaDiversity8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);

	if(IS_HARDWARE_TYPE_8821U(Adapter))
	{
		Hal_ReadPAType_8821A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	}
	else
	{
		Hal_ReadPAType_8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
		Hal_ReadRFEType_8812A(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	}

	hal_ReadUsbModeSwitch_8812AU(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
	hal_CustomizeByCustomerID_8812AU(Adapter);

	ReadLEDSetting_8812AU(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);

	// 2013/04/15 MH Add for different board type recognize.
	hal_ReadUsbType_8812AU(Adapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag);
}

static void Hal_ReadPROMContent_8812A(
	IN PADAPTER 		Adapter
	)
{	
	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
	u8			eeValue;

	/* check system boot selection */
	eeValue = rtw_read8(Adapter, REG_9346CR);
	pEEPROM->EepromOrEfuse		= (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE;
	pEEPROM->bautoload_fail_flag	= (eeValue & EEPROM_EN) ? _FALSE : _TRUE;

	DBG_8192C("Boot from %s, Autoload %s !\n", (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"),
				(pEEPROM->bautoload_fail_flag ? "Fail" : "OK") );

	//pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE;

	InitAdapterVariablesByPROM_8812AU(Adapter);
}

VOID
hal_ReadRFType_8812A(
	IN	PADAPTER	Adapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);

#if DISABLE_BB_RF
	pHalData->rf_chip = RF_PSEUDO_11N;
#else
	pHalData->rf_chip = RF_6052;
#endif

	//if (pHalData->rf_type == RF_1T1R){
	//	pHalData->bRFPathRxEnable[0] = _TRUE;
	//}
	//else {	// Default unknow type is 2T2r
	//	pHalData->bRFPathRxEnable[0] = pHalData->bRFPathRxEnable[1] = _TRUE;
	//}

	if (IsSupported24G(Adapter->registrypriv.wireless_mode) && 
		IsSupported5G(Adapter->registrypriv.wireless_mode))
		pHalData->BandSet = BAND_ON_BOTH;
	else if (IsSupported5G(Adapter->registrypriv.wireless_mode))
		pHalData->BandSet = BAND_ON_5G;
	else
		pHalData->BandSet = BAND_ON_2_4G;

	//if(Adapter->bInHctTest)
	//	pHalData->BandSet = BAND_ON_2_4G;
}

VOID
hal_CustomizedBehavior_8812AUsb(
	IN PADAPTER 		Adapter
	)
{
#if 0
	PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);
	
	// DTM test, we need to disable all power save mode.
	if(Adapter->bInHctTest)
	{
		pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
		pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
		pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
		pMgntInfo->PowerSaveControl.bLeisurePsModeBackup =FALSE;
		pMgntInfo->keepAliveLevel = 0;
		pMgntInfo->dot11CurrentChannelNumber = 10;
		pMgntInfo->Regdot11ChannelNumber = 10;
	}	
#endif
}

void
ReadAdapterInfo8812AU(
	IN PADAPTER			Adapter
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	
	DBG_871X("====> ReadAdapterInfo8812AU\n");

	// Read all content in Efuse/EEPROM.
	Hal_ReadPROMContent_8812A(Adapter);

	// We need to define the RF type after all PROM value is recognized.
	hal_ReadRFType_8812A(Adapter);

	// 2011/02/09 MH We gather the same value for all USB series IC.
	hal_CustomizedBehavior_8812AUsb(Adapter);

	DBG_871X("ReadAdapterInfo8812AU <====\n");
}

void UpdateInterruptMask8812AU(PADAPTER padapter,u8 bHIMR0 ,u32 AddMSR, u32 RemoveMSR)
{
	HAL_DATA_TYPE *pHalData;

	u32 *himr;
	pHalData = GET_HAL_DATA(padapter);

	if(bHIMR0)
		himr = &(pHalData->IntrMask[0]);
	else
		himr = &(pHalData->IntrMask[1]);
	
	if (AddMSR)
		*himr |= AddMSR;

	if (RemoveMSR)
		*himr &= (~RemoveMSR);

	if(bHIMR0)	
		rtw_write32(padapter, REG_HIMR0_8812, *himr);
	else
		rtw_write32(padapter, REG_HIMR1_8812, *himr);	

}

void SetHwReg8812AU(PADAPTER Adapter, u8 variable, u8* val)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	DM_ODM_T 		*podmpriv = &pHalData->odmpriv;
_func_enter_;

	switch(variable)
	{
		case HW_VAR_RXDMA_AGG_PG_TH:
#ifdef CONFIG_USB_RX_AGGREGATION
			{
				/*u8	threshold = *((u8 *)val);
				if( threshold == 0)
				{
					threshold = pHalData->UsbRxAggPageCount;
				}
				rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);*/
			}
#endif
			break;
		case HW_VAR_SET_RPWM:
#ifdef CONFIG_LPS_LCLK
			{
				u8	ps_state = *((u8 *)val);
				//rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e.
				//BIT0 value - 1: 32k, 0:40MHz.
				//BIT6 value - 1: report cpwm value after success set, 0:do not report.
				//BIT7 value - Toggle bit change.
				//modify by Thomas. 2012/4/2.
				ps_state = ps_state & 0xC1;
				//DBG_871X("##### Change RPWM value to = %x for switch clk #####\n",ps_state);
				rtw_write8(Adapter, REG_USB_HRPWM, ps_state);
			}
#endif
			break;
		case HW_VAR_USB_MODE:
			if(*val == 1)
				rtw_write8(Adapter, REG_OPT_CTRL_8812, 0x4);
			else if(*val == 2)
				rtw_write8(Adapter, REG_OPT_CTRL_8812, 0x8);
			
			rtw_write8(Adapter, REG_SDIO_CTRL_8812, 0x2);
			rtw_write8(Adapter, REG_ACLK_MON, 0x1);
			//
			// 2013/01/29 MH Test with chunchu/cheng, in Alpha AMD platform. when
			// U2/U3 switch 8812AU will be recognized as another card and then
			// OS will treat it as a new card and assign a new GUID. Then SWUSB
			// service can not work well. We need to delay the card switch time to U3
			// Then OS can unload the previous U2 port card and load new U3 port card later.
			// The strange sympton can disappear.
			//
			rtw_write8(Adapter, REG_CAL_TIMER+1, 0x40);
			//rtw_write8(Adapter, REG_CAL_TIMER+1, 0x3);
			rtw_write8(Adapter, REG_APS_FSMCO+1, 0x80);
			break;
		default:
			SetHwReg8812A(Adapter, variable, val);
			break;
	}

_func_exit_;
}

void GetHwReg8812AU(PADAPTER Adapter, u8 variable, u8* val)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	DM_ODM_T 		*podmpriv = &pHalData->odmpriv;
_func_enter_;

	switch(variable)
	{
		default:
			GetHwReg8812A(Adapter,variable,val);
			break;
	}

_func_exit_;
}

//
//	Description:
//		Change default setting of specified variable.
//
u8
SetHalDefVar8812AUsb(
	IN	PADAPTER				Adapter,
	IN	HAL_DEF_VARIABLE		eVariable,
	IN	PVOID					pValue
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	u8			bResult = _SUCCESS;

	switch(eVariable)
	{
		default:
			SetHalDefVar8812A(Adapter,eVariable,pValue);
			break;
	}

	return bResult;
}

//
//	Description: 
//		Query setting of specified variable.
//
u8
GetHalDefVar8812AUsb(
	IN	PADAPTER				Adapter,
	IN	HAL_DEF_VARIABLE		eVariable,
	IN	PVOID					pValue
	)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
	u8			bResult = _SUCCESS;

	switch(eVariable)
	{
		default:
			GetHalDefVar8812A(Adapter,eVariable,pValue);
			break;
	}

	return bResult;
}

void _update_response_rate(_adapter *padapter,unsigned int mask)
{
	u8	RateIndex = 0;
	// Set RRSR rate table.
	rtw_write8(padapter, REG_RRSR, mask&0xff);
	rtw_write8(padapter,REG_RRSR+1, (mask>>8)&0xff);

	// Set RTS initial rate
	while(mask > 0x1)
	{
		mask = (mask>> 1);
		RateIndex++;
	}
	rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex);
}

static void rtl8812au_init_default_value(_adapter * padapter)
{
	PHAL_DATA_TYPE pHalData;
	struct pwrctrl_priv *pwrctrlpriv;
	struct dm_priv *pdmpriv;
	u8 i;

	pHalData = GET_HAL_DATA(padapter);
	pwrctrlpriv = &padapter->pwrctrlpriv;
	pdmpriv = &pHalData->dmpriv;


	//init default value
	pHalData->fw_ractrl = _FALSE;		
	if(!pwrctrlpriv->bkeepfwalive)
		pHalData->LastHMEBoxNum = 0;	

	//init dm default value
	pHalData->bChnlBWInitialzed = _FALSE;
	pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = _FALSE;
	pHalData->odmpriv.RFCalibrateInfo.TM_Trigger = 0;//for IQK
	pHalData->pwrGroupCnt = 0;
	pHalData->PGMaxGroup= MAX_PG_GROUP;
	pHalData->odmpriv.RFCalibrateInfo.ThermalValue_HP_index = 0;
	for(i = 0; i < HP_THERMAL_NUM; i++)
		pHalData->odmpriv.RFCalibrateInfo.ThermalValue_HP[i] = 0;

	pHalData->IntrMask[0]	= (u32)(			\
								//IMR_ROK 		|
								//IMR_RDU			|
								//IMR_VODOK		|
								//IMR_VIDOK		|
								//IMR_BEDOK		|
								//IMR_BKDOK		|
								//IMR_MGNTDOK		|
								//IMR_HIGHDOK		|
								//IMR_CPWM		|
								//IMR_CPWM2		|
								//IMR_C2HCMD		|
								//IMR_HISR1_IND_INT	|
								//IMR_ATIMEND		|
								//IMR_BCNDMAINT_E	|
								//IMR_HSISR_IND_ON_INT	|
								//IMR_BCNDOK0		|
								//IMR_BCNDMAINT0	|
								//IMR_TSF_BIT32_TOGGLE	|
								//IMR_TXBCN0OK	|
								//IMR_TXBCN0ERR	|
								//IMR_GTINT3		|
								//IMR_GTINT4		|
								//IMR_TXCCK		|
								0);

	pHalData->IntrMask[1] 	= (u32)(\
								//IMR_RXFOVW		|
								//IMR_TXFOVW		|
								//IMR_RXERR		|
								//IMR_TXERR		|
								//IMR_ATIMEND_E	|
								//IMR_BCNDOK1		|
								//IMR_BCNDOK2		|
								//IMR_BCNDOK3		|
								//IMR_BCNDOK4		|
								//IMR_BCNDOK5		|
								//IMR_BCNDOK6		|
								//IMR_BCNDOK7		|
								//IMR_BCNDMAINT1	|
								//IMR_BCNDMAINT2	|
								//IMR_BCNDMAINT3	|
								//IMR_BCNDMAINT4	|
								//IMR_BCNDMAINT5	|
								//IMR_BCNDMAINT6	|
								//IMR_BCNDMAINT7	|
								0);
}

static u8 rtl8812au_ps_func(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8 *val)
{	
	u8 bResult = _TRUE;
	switch(efunc_id){

		#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
		case HAL_USB_SELECT_SUSPEND:
			{
				u8 bfwpoll = *(( u8*)val);
				//rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500);//note fw to support hw power down ping detect
			}
			break;
		#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED

		default:
			break;
	}
	return bResult;
}

void rtl8812au_set_hal_ops(_adapter * padapter)
{
	struct hal_ops	*pHalFunc = &padapter->HalFunc;

_func_enter_;

#ifdef CONFIG_CONCURRENT_MODE
	if(padapter->isprimary)
#endif //CONFIG_CONCURRENT_MODE
	{
		padapter->HalData = rtw_zmalloc(sizeof(HAL_DATA_TYPE));
		if(padapter->HalData == NULL){
			DBG_8192C("cant not alloc memory for HAL DATA \n");
		}
	}
	//_rtw_memset(padapter->HalData, 0, sizeof(HAL_DATA_TYPE));
	padapter->hal_data_sz = sizeof(HAL_DATA_TYPE);

	pHalFunc->hal_power_on = _InitPowerOn8812AU;
	pHalFunc->hal_init = &rtl8812au_hal_init;
	pHalFunc->hal_deinit = &rtl8812au_hal_deinit;

	//pHalFunc->free_hal_data = &rtl8192c_free_hal_data;

	pHalFunc->inirp_init = &rtl8812au_inirp_init;
	pHalFunc->inirp_deinit = &rtl8812au_inirp_deinit;

	pHalFunc->init_xmit_priv = &rtl8812au_init_xmit_priv;
	pHalFunc->free_xmit_priv = &rtl8812au_free_xmit_priv;

	pHalFunc->init_recv_priv = &rtl8812au_init_recv_priv;
	pHalFunc->free_recv_priv = &rtl8812au_free_recv_priv;
#ifdef CONFIG_SW_LED
	pHalFunc->InitSwLeds = &rtl8812au_InitSwLeds;
	pHalFunc->DeInitSwLeds = &rtl8812au_DeInitSwLeds;
#else //case of hw led or no led
	pHalFunc->InitSwLeds = NULL;
	pHalFunc->DeInitSwLeds = NULL;	
#endif//CONFIG_SW_LED
	
	pHalFunc->init_default_value = &rtl8812au_init_default_value;
	pHalFunc->intf_chip_configure = &rtl8812au_interface_configure;
	pHalFunc->read_adapter_info = &ReadAdapterInfo8812AU;

	//pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C;
	//pHalFunc->set_channel_handler = &PHY_SwChnl8192C;

	//pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog;


	pHalFunc->SetHwRegHandler = &SetHwReg8812AU;
	pHalFunc->GetHwRegHandler = &GetHwReg8812AU;
  	pHalFunc->GetHalDefVarHandler = &GetHalDefVar8812AUsb;
 	pHalFunc->SetHalDefVarHandler = &SetHalDefVar8812AUsb;

	pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8812A;

	//pHalFunc->Add_RateATid = &rtl8192c_Add_RateATid;

	pHalFunc->hal_xmit = &rtl8812au_hal_xmit;
	pHalFunc->mgnt_xmit = &rtl8812au_mgnt_xmit;
	pHalFunc->hal_xmitframe_enqueue = &rtl8812au_hal_xmitframe_enqueue;

#ifdef CONFIG_HOSTAPD_MLME
	pHalFunc->hostap_mgnt_xmit_entry = &rtl8812au_hostap_mgnt_xmit_entry;
#endif
	pHalFunc->interface_ps_func = &rtl8812au_ps_func;
#ifdef CONFIG_XMIT_THREAD_MODE
	pHalFunc->xmit_thread_handler = &rtl8812au_xmit_buf_handler;
#endif
	rtl8812_set_hal_ops(pHalFunc);
_func_exit_;

}