/******************************************************************************
 *
 * Copyright(c) 2016 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#define _RTL8821C_PHY_C_

#include <hal_data.h>		/* HAL_DATA_TYPE */
#include "../hal_halmac.h"	/* REG_CCK_CHECK_8821C */
#include "rtl8821c.h"


/*
 * Description:
 *	Initialize Register definition offset for Radio Path A/B/C/D
 *	The initialization value is constant and it should never be changes
 */
static void bb_rf_register_definition(PADAPTER adapter)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);


	/* RF Interface Sowrtware Control */
	hal->PHYRegDef[ODM_RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW;
	hal->PHYRegDef[ODM_RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW;

	/* RF Interface Output (and Enable) */
	hal->PHYRegDef[ODM_RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE;
	hal->PHYRegDef[ODM_RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE;

	/* RF Interface (Output and) Enable */
	hal->PHYRegDef[ODM_RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE;
	hal->PHYRegDef[ODM_RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE;

	hal->PHYRegDef[ODM_RF_PATH_A].rf3wireOffset = rA_LSSIWrite_Jaguar;
	hal->PHYRegDef[ODM_RF_PATH_B].rf3wireOffset = rB_LSSIWrite_Jaguar;

	hal->PHYRegDef[ODM_RF_PATH_A].rfHSSIPara2 = rHSSIRead_Jaguar;
	hal->PHYRegDef[ODM_RF_PATH_B].rfHSSIPara2 = rHSSIRead_Jaguar;

	/* Tranceiver Readback LSSI/HSPI mode */
	hal->PHYRegDef[ODM_RF_PATH_A].rfLSSIReadBack = rA_SIRead_Jaguar;
	hal->PHYRegDef[ODM_RF_PATH_B].rfLSSIReadBack = rB_SIRead_Jaguar;
	hal->PHYRegDef[ODM_RF_PATH_A].rfLSSIReadBackPi = rA_PIRead_Jaguar;
	hal->PHYRegDef[ODM_RF_PATH_B].rfLSSIReadBackPi = rB_PIRead_Jaguar;
}

static void init_bb_rf(PADAPTER adapter)
{
	u8 val8;
	u16 val16;


	/* Enable BB and RF */
	val8 = rtw_read8(adapter, REG_SYS_FUNC_EN_8821C);
	if (IS_HARDWARE_TYPE_8821CU(adapter))
		val8 |= BIT_FEN_USBA_8821C;
	else if (IS_HARDWARE_TYPE_8821CE(adapter))
		val8 |= BIT_FEN_PCIEA_8821C;
	rtw_write8(adapter, REG_SYS_FUNC_EN_8821C, val8);

	/*
	 * 8821C MP Chip => Reset BB/RF ??
	 * Need to set BBRSTB and GLB_RSTB = 1->0->1 to generate a postive edge and negtive edge for BB
	 */
	val8 |= BIT_FEN_BB_GLB_RSTN_8821C | BIT_FEN_BBRSTB_8821C;
	rtw_write8(adapter, REG_SYS_FUNC_EN_8821C, val8);
	val8 &= ~(BIT_FEN_BB_GLB_RSTN_8821C | BIT_FEN_BBRSTB_8821C);
	rtw_write8(adapter, REG_SYS_FUNC_EN_8821C, val8);
	val8 |= BIT_FEN_BB_GLB_RSTN_8821C | BIT_FEN_BBRSTB_8821C;
	rtw_write8(adapter, REG_SYS_FUNC_EN_8821C, val8);

	val8 = BIT_RF_EN_8821C | BIT_RF_RSTB_8821C | BIT_RF_SDMRSTB_8821C;
	/* 0x1F[7:0] = 0x07 PathA RF Power On */
	rtw_write8(adapter, REG_RF_CTRL_8821C, val8);
	rtw_usleep_os(10);

	/*0xEC [31:24],BIT_WLRF1_CTRL,	For WLRF1 control*/
	/* 0xEF[7:0] = 0x07 for RFE Type=2,BTG RF Power On*/
	rtw_write8(adapter, REG_WLRF1_8821C + 3, val8);
	rtw_usleep_os(10);

}

u8 rtl8821c_init_phy_parameter_mac(PADAPTER adapter)
{
	u8 ret = _FAIL;
	PHAL_DATA_TYPE hal;

	hal = GET_HAL_DATA(adapter);

#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
	ret = phy_ConfigMACWithParaFile(adapter, PHY_FILE_MAC_REG);
	if (ret == _FAIL)
#endif /* CONFIG_LOAD_PHY_PARA_FROM_FILE */
	{
		odm_config_mac_with_header_file(&hal->odmpriv);
		ret = _SUCCESS;
	}

	return ret;
}

static u8 _init_phy_parameter_bb(PADAPTER Adapter)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(Adapter);
	u8 ret = _TRUE;
	int res;
	enum hal_status status;


	/*
	 * 1. Read PHY_REG.TXT BB INIT!!
	 */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
	res = phy_ConfigBBWithParaFile(Adapter, PHY_FILE_PHY_REG, CONFIG_BB_PHY_REG);
	if (res == _FAIL)
#endif
	{
		ret = _FALSE;
		status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_PHY_REG);
		if (HAL_STATUS_SUCCESS == status)
			ret = _TRUE;
	}

	if (ret != _TRUE) {
		RTW_INFO("%s: Write BB Reg Fail!!", __FUNCTION__);
		goto exit;
	}

#if 0 /* def CONFIG_MP_INCLUDED */ /* No parameter with MP using currently by BB@Stanley.*/
	if (Adapter->registrypriv.mp_mode == 1) {
		/*
		 * 1.1 Read PHY_REG_MP.TXT BB INIT!!
		 */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
		res = phy_ConfigBBWithMpParaFile(Adapter, PHY_FILE_PHY_REG_MP);
		if (res == _FAIL)
#endif
		{
			ret = _FALSE;
			status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_PHY_REG_MP);
			if (HAL_STATUS_SUCCESS == status)
				ret = _TRUE;
		}

		if (ret != _TRUE) {
			RTW_INFO("%s : Write BB Reg MP Fail!!", __FUNCTION__);
			goto exit;
		}
	}
#endif /* CONFIG_MP_INCLUDED */

	/*
	 * 2. Read BB AGC table Initialization
	 */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
	res = phy_ConfigBBWithParaFile(Adapter, PHY_FILE_AGC_TAB, CONFIG_BB_AGC_TAB);
	if (res == _FAIL)
#endif
	{
		ret = _FALSE;
		status = odm_config_bb_with_header_file(&hal->odmpriv, CONFIG_BB_AGC_TAB);
		if (HAL_STATUS_SUCCESS == status)
			ret = _TRUE;
	}

	if (ret != _TRUE) {
		RTW_INFO("%s: AGC Table Fail\n", __FUNCTION__);
		goto exit;
	}

exit:
	return ret;
}

static u8 init_bb_reg(PADAPTER adapter)
{
	u8 ret = _TRUE;
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);


	/*
	 * Config BB and AGC
	 */
	ret = _init_phy_parameter_bb(adapter);

	hal_set_crystal_cap(adapter, hal->crystal_cap);

	phy_set_bb_reg(adapter, rCCK0_FalseAlarmReport + 2, BIT2 | BIT6, 0);
	return ret;
}

static u8 _init_phy_parameter_rf(PADAPTER adapter)
{
	u32 val32 = 0;
	u8 eRFPath;
	PBB_REGISTER_DEFINITION_T pPhyReg;
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	enum hal_status status;
	int res;
	u8 ret = _TRUE;


	/*
	 * Initialize RF
	 */
	for (eRFPath = 0; eRFPath < hal->NumTotalRFPath; eRFPath++) {
		pPhyReg = &hal->PHYRegDef[eRFPath];

		/* Initialize RF from configuration file */
		switch (eRFPath) {
		case RF_PATH_A:
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
			res = PHY_ConfigRFWithParaFile(adapter, PHY_FILE_RADIO_A, eRFPath);
			if (res == _FAIL)
#endif
			{
				ret = _FALSE;
				status = odm_config_rf_with_header_file(&hal->odmpriv, CONFIG_RF_RADIO, (enum odm_rf_radio_path_e)eRFPath);
				if (HAL_STATUS_SUCCESS == status)
					ret = _TRUE;
			}
			break;
		case RF_PATH_B:
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
			res = PHY_ConfigRFWithParaFile(adapter, PHY_FILE_RADIO_B, eRFPath);
			if (res == _FAIL)
#endif
			{
				ret = _FALSE;
				status = odm_config_rf_with_header_file(&hal->odmpriv, CONFIG_RF_RADIO, (enum odm_rf_radio_path_e)eRFPath);
				if (HAL_STATUS_SUCCESS == status)
					ret = _TRUE;
			}
			break;
		case RF_PATH_C:
			break;
		case RF_PATH_D:
			break;
		}

		if (ret != _TRUE)
			goto exit;
	}

	/*
	 * Configuration of Tx Power Tracking
	 */
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
	res = PHY_ConfigRFWithTxPwrTrackParaFile(adapter, PHY_FILE_TXPWR_TRACK);
	if (res == _FAIL)
#endif
	{
		ret = _FALSE;
		status = odm_config_rf_with_tx_pwr_track_header_file(&hal->odmpriv);
		if (HAL_STATUS_SUCCESS == status)
			ret = _TRUE;
	}
	if (ret != _TRUE)
		goto exit;

exit:
	return ret;
}

static u8 init_rf_reg(PADAPTER adapter)
{
	u8 ret = _TRUE;


	ret = _init_phy_parameter_rf(adapter);

	return ret;
}
u8 rtl8821c_phy_init(PADAPTER adapter)
{
	PHAL_DATA_TYPE hal;
	struct PHY_DM_STRUCT *phydm;

	hal = GET_HAL_DATA(adapter);
	phydm = &hal->odmpriv;

	bb_rf_register_definition(adapter);

	init_bb_rf(adapter);

	if (_FALSE == config_phydm_parameter_init_8821c(phydm, ODM_PRE_SETTING))
		return _FALSE;

	if (_FALSE == init_bb_reg(adapter))
		return _FALSE;

	if (_FALSE == init_rf_reg(adapter))
		return _FALSE;

#if 0
	if (_FALSE = config_phydm_trx_mode_8821c(phydm, ODM_RF_A, ODM_RF_A, FALSE))
		return _FALSE;
#endif

	if (_FALSE ==  config_phydm_parameter_init_8821c(phydm, ODM_POST_SETTING))
		return _FALSE;

	hal->phy_spec.trx_cap = query_phydm_trx_capability(phydm);
	hal->phy_spec.stbc_cap = query_phydm_stbc_capability(phydm);
	hal->phy_spec.ldpc_cap = query_phydm_ldpc_capability(phydm);
	hal->phy_spec.txbf_param = query_phydm_txbf_parameters(phydm);
	hal->phy_spec.txbf_cap = query_phydm_txbf_capability(phydm);
	/*rtw_dump_phy_cap(RTW_DBGDUMP, adapter);*/
	return _TRUE;
}

static u32 phy_calculatebitshift(u32 mask)
{
	u32 i;


	for (i = 0; i <= 31; i++)
		if (mask & BIT(i))
			break;

	return i;
}

u32 rtl8821c_read_bb_reg(PADAPTER adapter, u32 addr, u32 mask)
{
	u32 val = 0, val_org, shift;


#if (DISABLE_BB_RF == 1)
	return 0;
#endif

	val_org = rtw_read32(adapter, addr);
	shift = phy_calculatebitshift(mask);
	val = (val_org & mask) >> shift;

	return val;
}

void rtl8821c_write_bb_reg(PADAPTER adapter, u32 addr, u32 mask, u32 val)
{
	u32 val_org, shift;


#if (DISABLE_BB_RF == 1)
	return;
#endif

	if (mask != 0xFFFFFFFF) {
		/* not "double word" write */
		val_org = rtw_read32(adapter, addr);
		shift = phy_calculatebitshift(mask);
		val = ((val_org & (~mask)) | ((val << shift) & mask));
	}

	rtw_write32(adapter, addr, val);
}

u32 rtl8821c_read_rf_reg(PADAPTER adapter, u8 path, u32 addr, u32 mask)
{
	PHAL_DATA_TYPE hal;
	struct PHY_DM_STRUCT *phydm;
	u32 val = 0;

	hal = GET_HAL_DATA(adapter);
	phydm = &hal->odmpriv;

	val = config_phydm_read_rf_reg_8821c(phydm, path, addr, mask);
	if (!config_phydm_read_rf_check_8821c(val))
		RTW_INFO(FUNC_ADPT_FMT ": read RF reg path=%d addr=0x%x mask=0x%x FAIL!\n",
			 FUNC_ADPT_ARG(adapter), path, addr, mask);
	return val;
}

void rtl8821c_write_rf_reg(PADAPTER adapter, u8 path, u32 addr, u32 mask, u32 val)
{
	PHAL_DATA_TYPE hal;
	struct PHY_DM_STRUCT *phydm;
	u8 ret;


	hal = GET_HAL_DATA(adapter);
	phydm = &hal->odmpriv;

	ret = config_phydm_write_rf_reg_8821c(phydm, path, addr, mask, val);
	if (_FALSE == ret)
		RTW_INFO(FUNC_ADPT_FMT ": write RF reg path=%d addr=0x%x mask=0x%x val=0x%x FAIL!\n",
			 FUNC_ADPT_ARG(adapter), path, addr, mask, val);

}

void rtl8821c_set_tx_power_level(PADAPTER adapter, u8 channel)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	u8 path = ODM_RF_PATH_A;
	struct PHY_DM_STRUCT *phydm = &hal->odmpriv;
	struct _FAST_ANTENNA_TRAINNING_ *pDM_FatTable = &phydm->dm_fat_table;

	/*((hal->RFEType == 2) || (hal->RFEType == 4) || (hal->RFEType == 7))*/
	if ((channel <= 14) && (SWITCH_TO_BTG == query_phydm_default_rf_set_8821c(phydm)))
		path = ODM_RF_PATH_B;

	/*if (adapter->registrypriv.mp_mode == 1)*/

	phy_set_tx_power_index_by_rate_section(adapter, path, channel, CCK);
	phy_set_tx_power_index_by_rate_section(adapter, path, channel, OFDM);
	phy_set_tx_power_index_by_rate_section(adapter, path, channel, HT_MCS0_MCS7);
	phy_set_tx_power_index_by_rate_section(adapter, path, channel, VHT_1SSMCS0_1SSMCS9);
}

void rtl8821c_get_tx_power_level(PADAPTER adapter, s32 *power)
{
}

/*
 * Parameters:
 *	padatper
 *	powerindex	power index for rate
 *	rfpath		Antenna(RF) path, type "enum odm_rf_radio_path_e"
 *	rate		data rate, type "enum MGN_RATE"
 */
 /*#define DBG_SET_TX_POWER_IDX*/
void rtl8821c_set_tx_power_index(PADAPTER adapter, u32 powerindex, u8 rfpath, u8 rate)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	struct PHY_DM_STRUCT *phydm = &hal->odmpriv;
	u8 shift = 0;
	u8 hw_rate_idx;
	static u32 index = 0;

	/*hw_rate_idx = PHY_GetRateIndexOfTxPowerByRate(rate);*/
	hw_rate_idx = MRateToHwRate(rate);

	if (hw_rate_idx > DESC_RATEVHTSS1MCS9) {
		RTW_ERR(FUNC_ADPT_FMT"warn rate(%s)\n", FUNC_ADPT_ARG(adapter), HDATA_RATE(hw_rate_idx));
		rtw_warn_on(1);
	}

	if (rfpath > ODM_RF_PATH_A) {
		#ifdef DBG_SET_TX_POWER_IDX
		RTW_INFO(FUNC_ADPT_FMT" rfpath(%d) power index to ODM_RF_PATH_A\n", FUNC_ADPT_ARG(adapter), rfpath);
		#endif
		rfpath =  ODM_RF_PATH_A;
	}
	/*
	* For 8821C, phydm api use 4 bytes txagc value
	* driver must combine every four 1 byte to one 4 byte and send to phydm api
	*/
	shift = hw_rate_idx % 4;
	index |= ((powerindex & 0xff) << (shift * 8));

	if (shift == 3) {
		hw_rate_idx = hw_rate_idx - 3;

		if (!config_phydm_write_txagc_8821c(phydm, index, rfpath, hw_rate_idx)) {
			RTW_ERR(FUNC_ADPT_FMT" (power index:0x%02x, rfpath:%d, rate:0x%02x, disable api:%d) wite TX-AGC failed\n",
				FUNC_ADPT_ARG(adapter), index, rfpath, hw_rate_idx, phydm->is_disable_phy_api);

			rtw_warn_on(1);
		}
		#ifdef DBG_SET_TX_POWER_IDX
		RTW_INFO(FUNC_ADPT_FMT"Rate:%s ,tx_power_idx: 0x%08x\n", FUNC_ADPT_ARG(adapter), HDATA_RATE(hw_rate_idx), index);
		#endif
		index = 0;
	}
	if (MGN_VHT1SS_MCS9 == rate) {
		if (!config_phydm_write_txagc_8821c(phydm, index, rfpath, MRateToHwRate(MGN_VHT1SS_MCS8))) {
			RTW_ERR(FUNC_ADPT_FMT" (power index:0x%02x, rfpath:%d, rate:0x%02x, disable api:%d) wite TX-AGC failed\n",
				FUNC_ADPT_ARG(adapter), index, rfpath, hw_rate_idx, phydm->is_disable_phy_api);

			rtw_warn_on(1);
		}
		#ifdef DBG_SET_TX_POWER_IDX
		RTW_INFO(FUNC_ADPT_FMT"-Rate:%s ,tx_power_idx: 0x%08x\n", FUNC_ADPT_ARG(adapter), HDATA_RATE(MRateToHwRate(MGN_VHT1SS_MCS8)), index);
		#endif
		index = 0;
	}

}

static u8 rtl8821c_phy_get_current_tx_num(PADAPTER adapter, u8 rate)
{
	u8 tx_num = 0;

	if ((rate >= MGN_MCS8 && rate <= MGN_MCS15) ||
	    (rate >= MGN_VHT2SS_MCS0 && rate <= MGN_VHT2SS_MCS9))
		tx_num = RF_2TX;
	else
		tx_num = RF_1TX;

	return tx_num;
}

/*
 * Parameters:
 *	padatper
 *	rfpath		Antenna(RF) path, type "enum odm_rf_radio_path_e"
 *	rate		data rate, type "enum MGN_RATE"
 *	bandwidth	Bandwidth, type "enum _CHANNEL_WIDTH"
 *	channel		Channel number
 *
 * Rteurn:
 *	tx_power	power index for rate
 */
u8 rtl8821c_get_tx_power_index(PADAPTER adapter, u8 rfpath, u8 rate, u8 bandwidth, u8 channel, struct txpwr_idx_comp *tic)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	u8 base_idx = 0, power_idx = 0;
	s8 by_rate_diff = 0, limit = 0, tpt_offset = 0, extra_bias = 0;
	u8 tx_num = rtl8821c_phy_get_current_tx_num(adapter, rate);
	u8 bIn24G = _FALSE;

	base_idx = PHY_GetTxPowerIndexBase(adapter, rfpath, rate, bandwidth, channel, &bIn24G);

	by_rate_diff = PHY_GetTxPowerByRate(adapter, (u8)(!bIn24G), rfpath, tx_num, rate);
	limit = PHY_GetTxPowerLimit(adapter, adapter->registrypriv.RegPwrTblSel, (BAND_TYPE)(!bIn24G),
		    hal->current_channel_bw, rfpath, rate, hal->current_channel);

	/* tpt_offset += PHY_GetTxPowerTrackingOffset(adapter, rfpath, rate); */

	if (tic) {
		tic->base = base_idx;
		tic->by_rate = by_rate_diff;
		tic->limit = limit;
		tic->tpt = tpt_offset;
		tic->ebias = extra_bias;
	}

	by_rate_diff = by_rate_diff > limit ? limit : by_rate_diff;
	power_idx = base_idx + by_rate_diff + tpt_offset + extra_bias;

#if 0
#if CCX_SUPPORT
	CCX_CellPowerLimit(adapter, channel, rate, (pu1Byte)&power_idx);
#endif
#endif

	if (power_idx > MAX_POWER_INDEX)
		power_idx = MAX_POWER_INDEX;

	return power_idx;
}

/*
 * Description:
 *	Check need to switch band or not
 * Parameters:
 *	channelToSW	channel wiii be switch to
 * Return:
 *	_TRUE		need to switch band
 *	_FALSE		not need to switch band
 */
static u8 need_switch_band(PADAPTER adapter, u8 channelToSW)
{
	u8 u1tmp = 0;
	u8 ret_value = _TRUE;
	u8 Band = BAND_ON_5G, BandToSW = BAND_ON_5G;
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);

	Band = hal->current_band_type;

	/* Use current swich channel to judge Band Type and switch Band if need */
	if (channelToSW > 14)
		BandToSW = BAND_ON_5G;
	else
		BandToSW = BAND_ON_2_4G;

	if (BandToSW != Band) {
		/* record current band type for other hal use */
		hal->current_band_type = (BAND_TYPE)BandToSW;
		ret_value = _TRUE;
	} else
		ret_value = _FALSE;

	return ret_value;
}

static u8 get_pri_ch_id(PADAPTER adapter)
{
	u8 pri_ch_idx = 0;
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);

	if (hal->current_channel_bw == CHANNEL_WIDTH_80) {
		/* primary channel is at lower subband of 80MHz & 40MHz */
		if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER))
			pri_ch_idx = VHT_DATA_SC_20_LOWEST_OF_80MHZ;
		/* primary channel is at lower subband of 80MHz & upper subband of 40MHz */
		else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER))
			pri_ch_idx = VHT_DATA_SC_20_LOWER_OF_80MHZ;
		/* primary channel is at upper subband of 80MHz & lower subband of 40MHz */
		else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER))
			pri_ch_idx = VHT_DATA_SC_20_UPPER_OF_80MHZ;
		/* primary channel is at upper subband of 80MHz & upper subband of 40MHz */
		else if ((hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER) && (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER))
			pri_ch_idx = VHT_DATA_SC_20_UPPERST_OF_80MHZ;
		else {
			if (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER)
				pri_ch_idx = VHT_DATA_SC_40_LOWER_OF_80MHZ;
			else if (hal->nCur80MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
				pri_ch_idx = VHT_DATA_SC_40_UPPER_OF_80MHZ;
			else
				RTW_INFO("SCMapping: DONOT CARE Mode Setting\n");
		}
	} else if (hal->current_channel_bw == CHANNEL_WIDTH_40) {
		/* primary channel is at upper subband of 40MHz */
		if (hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
			pri_ch_idx = VHT_DATA_SC_20_UPPER_OF_80MHZ;
		/* primary channel is at lower subband of 40MHz */
		else if (hal->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER)
			pri_ch_idx = VHT_DATA_SC_20_LOWER_OF_80MHZ;
		else
			RTW_INFO("SCMapping: DONOT CARE Mode Setting\n");
	}

	return  pri_ch_idx;
}

static void mac_switch_bandwidth(PADAPTER adapter, u8 pri_ch_idx)
{
	u8 channel = 0, bw = 0;
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	int err;

	channel = hal->current_channel;
	bw = hal->current_channel_bw;
	err = rtw_halmac_set_bandwidth(adapter_to_dvobj(adapter), channel, pri_ch_idx, bw);
	if (err) {
		RTW_INFO(FUNC_ADPT_FMT ": (channel=%d, pri_ch_idx=%d, bw=%d) fail\n",
			 FUNC_ADPT_ARG(adapter), channel, pri_ch_idx, bw);
	}
}
u32 phy_get_tx_bbswing_8812c(_adapter *adapter, BAND_TYPE band, u8 rf_path)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(adapter);
	struct PHY_DM_STRUCT		*pDM_Odm = &pHalData->odmpriv;
	struct odm_rf_calibration_structure	*pRFCalibrateInfo = &(pDM_Odm->rf_calibrate_info);
	s8	bbSwing_2G = -1 * GetRegTxBBSwing_2G(adapter);
	s8	bbSwing_5G = -1 * GetRegTxBBSwing_5G(adapter);
	u32	out = 0x200;
	const s8	AUTO = -1;

	if (pHalData->bautoload_fail_flag) {
		if (band == BAND_ON_2_4G) {
			pRFCalibrateInfo->bb_swing_diff_2g = bbSwing_2G;
			if (bbSwing_2G == 0)
				out = 0x200; /* 0 dB */
			else if (bbSwing_2G == -3)
				out = 0x16A; /* -3 dB */
			else if (bbSwing_2G == -6)
				out = 0x101; /* -6 dB */
			else if (bbSwing_2G == -9)
				out = 0x0B6; /* -9 dB */
			else {
				if (pHalData->ExternalPA_2G) {
					pRFCalibrateInfo->bb_swing_diff_2g = -3;
					out = 0x16A;
				} else  {
					pRFCalibrateInfo->bb_swing_diff_2g = 0;
					out = 0x200;
				}
			}
		} else if (band == BAND_ON_5G) {
			pRFCalibrateInfo->bb_swing_diff_5g = bbSwing_5G;
			if (bbSwing_5G == 0)
				out = 0x200; /* 0 dB */
			else if (bbSwing_5G == -3)
				out = 0x16A; /* -3 dB */
			else if (bbSwing_5G == -6)
				out = 0x101; /* -6 dB */
			else if (bbSwing_5G == -9)
				out = 0x0B6; /* -9 dB */
			else {
				if (pHalData->external_pa_5g) {
					pRFCalibrateInfo->bb_swing_diff_5g = -3;
					out = 0x16A;
				} else {
					pRFCalibrateInfo->bb_swing_diff_5g = 0;
					out = 0x200;
				}
			}
		} else {
			pRFCalibrateInfo->bb_swing_diff_2g = -3;
			pRFCalibrateInfo->bb_swing_diff_5g = -3;
			out = 0x16A; /* -3 dB */
		}
	} else {
		u32 swing = 0, onePathSwing = 0;

		if (band == BAND_ON_2_4G) {
			if (GetRegTxBBSwing_2G(adapter) == AUTO)
				swing = pHalData->tx_bbswing_24G;
			else if (bbSwing_2G ==  0)
				swing = 0x00; /* 0 dB */
			else if (bbSwing_2G == -3)
				swing = 0x55; /* -3 dB */
			else if (bbSwing_2G == -6)
				swing = 0xAA; /* -6 dB */
			else if (bbSwing_2G == -9)
				swing = 0xFF; /* -9 dB */
			else
				swing = 0x00;
		} else {
			if (GetRegTxBBSwing_5G(adapter) == AUTO)
				swing = pHalData->tx_bbswing_5G;
			else if (bbSwing_5G ==  0)
				swing = 0x00; /* 0 dB */
			else if (bbSwing_5G == -3)
				swing = 0x55; /* -3 dB */
			else if (bbSwing_5G == -6)
				swing = 0xAA; /* -6 dB */
			else if (bbSwing_5G == -9)
				swing = 0xFF; /* -9 dB */
			else
				swing = 0x00;
		}

		if (rf_path == ODM_RF_PATH_A)
			onePathSwing = (swing & 0x3) >> 0; /* 0xC6/C7[1:0] */

		if (onePathSwing == 0x0) {
			if (band == BAND_ON_2_4G)
				pRFCalibrateInfo->bb_swing_diff_2g = 0;
			else
				pRFCalibrateInfo->bb_swing_diff_5g = 0;
			out = 0x200; /* 0 dB */
		} else if (onePathSwing == 0x1) {
			if (band == BAND_ON_2_4G)
				pRFCalibrateInfo->bb_swing_diff_2g = -3;
			else
				pRFCalibrateInfo->bb_swing_diff_5g = -3;
			out = 0x16A; /* -3 dB */
		} else if (onePathSwing == 0x2) {
			if (band == BAND_ON_2_4G)
				pRFCalibrateInfo->bb_swing_diff_2g = -6;
			else
				pRFCalibrateInfo->bb_swing_diff_5g = -6;
			out = 0x101; /* -6 dB */
		} else if (onePathSwing == 0x3) {
			if (band == BAND_ON_2_4G)
				pRFCalibrateInfo->bb_swing_diff_2g = -9;
			else
				pRFCalibrateInfo->bb_swing_diff_5g = -9;
			out = 0x0B6; /* -9 dB */
		}
	}

	/* RTW_INFO("<=== PHY_GetTxBBSwing_8812C, out = 0x%X\n", out); */

	return out;
}

void phy_set_bb_swing_by_band_8812c(_adapter *adapter, u8 band, u8 previous_band)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(adapter);
	s8 BBDiffBetweenBand = 0;
	struct PHY_DM_STRUCT *pDM_Odm = &pHalData->odmpriv;
	struct odm_rf_calibration_structure *pRFCalibrateInfo = &(pDM_Odm->rf_calibrate_info);

	phy_set_bb_reg(adapter, rA_TxScale_Jaguar, 0xFFE00000,
			phy_get_tx_bbswing_8812c(adapter, (BAND_TYPE)band, ODM_RF_PATH_A)); /* 0xC1C[31:21] */

	/* When TxPowerTrack is ON, we should take care of the change of BB swing. */
	/* That is, reset all info to trigger Tx power tracking. */
	{

		if (band != previous_band) {
			BBDiffBetweenBand = (pRFCalibrateInfo->bb_swing_diff_2g - pRFCalibrateInfo->bb_swing_diff_5g);
			BBDiffBetweenBand = (band == BAND_ON_2_4G) ? BBDiffBetweenBand : (-1 * BBDiffBetweenBand);
			pRFCalibrateInfo->default_ofdm_index += BBDiffBetweenBand * 2;
		}

		odm_clear_txpowertracking_state(pDM_Odm);
	}

}

void phy_switch_wireless_band_8821c(_adapter *adapter)
{
	u8 ret = 0;
	PHAL_DATA_TYPE hal_data = GET_HAL_DATA(adapter);
	struct PHY_DM_STRUCT *pDM_Odm = &hal_data->odmpriv;
	u8 current_band = hal_data->current_band_type;

	if (need_switch_band(adapter, hal_data->current_channel) == _TRUE) {
#ifdef CONFIG_BT_COEXIST
		if (hal_data->EEPROMBluetoothCoexist) {
			struct mlme_ext_priv *mlmeext;

			/* switch band under site survey or not, must notify to BT COEX */
			mlmeext = &adapter->mlmeextpriv;
			if (mlmeext_scan_state(mlmeext) != SCAN_DISABLE)
				rtw_btcoex_switchband_notify(_TRUE, hal_data->current_band_type);
			else
				rtw_btcoex_switchband_notify(_FALSE, hal_data->current_band_type);
		} else
			rtw_btcoex_wifionly_switchband_notify(adapter);
#else /* !CONFIG_BT_COEXIST */
		rtw_btcoex_wifionly_switchband_notify(adapter);
#endif /* CONFIG_BT_COEXIST */

		/* hal->current_channel is center channel of pmlmeext->cur_channel(primary channel) */
		ret = config_phydm_switch_band_8821c(pDM_Odm, hal_data->current_channel);

		if (!ret) {
			RTW_ERR("%s: config_phydm_switch_band_8821c fail\n", __func__);
			rtw_warn_on(1);
			return;
		}
		phy_set_bb_swing_by_band_8812c(adapter, hal_data->current_band_type, current_band);
	}
}

/*
 * Description:
 *	Set channel & bandwidth & offset
 */
void rtl8821c_switch_chnl_and_set_bw(PADAPTER adapter)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(adapter);
	struct PHY_DM_STRUCT *pDM_Odm = &hal->odmpriv;
	u8 center_ch = 0, ret = 0;

	if (adapter->bNotifyChannelChange) {
		RTW_INFO("[%s] bSwChnl=%d, ch=%d, bSetChnlBW=%d, bw=%d\n",
			 __FUNCTION__,
			 hal->bSwChnl,
			 hal->current_channel,
			 hal->bSetChnlBW,
			 hal->current_channel_bw);
	}

	if (RTW_CANNOT_RUN(adapter)) {
		hal->bSwChnlAndSetBWInProgress = _FALSE;
		return;
	}

	/* set channel & Bandwidth register */
	/* 1. set switch band register if need to switch band */
	phy_switch_wireless_band_8821c(adapter);

	/* 2. set channel register */
	if (hal->bSwChnl) {
		ret = config_phydm_switch_channel_8821c(pDM_Odm, hal->current_channel);
		hal->bSwChnl = _FALSE;

		if (!ret) {
			RTW_INFO("%s: config_phydm_switch_channel_8821c fail\n", __FUNCTION__);
			rtw_warn_on(1);
			return;
		}
	}
	phydm_config_kfree(pDM_Odm, hal->current_channel);

	/* 3. set Bandwidth register */
	if (hal->bSetChnlBW) {
		/* get primary channel index */
		u8 pri_ch_idx = get_pri_ch_id(adapter);

		/* 3.1 set MAC register */
		mac_switch_bandwidth(adapter, pri_ch_idx);

		/* 3.2 set BB/RF registet */
		ret = config_phydm_switch_bandwidth_8821c(pDM_Odm, pri_ch_idx, hal->current_channel_bw);
		hal->bSetChnlBW = _FALSE;

		if (!ret) {
			RTW_INFO("%s: config_phydm_switch_bandwidth_8821c fail\n", __FUNCTION__);
			rtw_warn_on(1);
			return;
		}
	}

	/* TX Power Setting */
	/* odm_clear_txpowertracking_state(pDM_Odm); */
	rtw_hal_set_tx_power_level(adapter, hal->current_channel);

	/* IQK */
	if ((hal->bNeedIQK == _TRUE)
	    || (adapter->registrypriv.mp_mode == 1))  {
		#ifdef CONFIG_IQK_MONITOR
		u32 iqk_start_time = rtw_get_current_time();
		#endif

		phy_iq_calibrate_8821c(pDM_Odm, _FALSE);

		#ifdef CONFIG_IQK_MONITOR
		RTW_INFO(ADPT_FMT" switch CH(%d) DO IQK : %d ms\n", 
			ADPT_ARG(adapter), hal->current_channel, rtw_get_passing_time_ms(iqk_start_time));
		#endif
		hal->bNeedIQK = _FALSE;
	}
}

/*
 * Description:
 *	Store channel setting to hal date
 * Parameters:
 *	bSwitchChannel		swith channel or not
 *	bSetBandWidth		set band or not
 *	ChannelNum		center channel
 *	ChnlWidth		bandwidth
 *	ChnlOffsetOf40MHz	channel offset for 40MHz Bandwidth
 *	ChnlOffsetOf80MHz	channel offset for 80MHz Bandwidth
 *	CenterFrequencyIndex1	center channel index
 */

void rtl8821c_handle_sw_chnl_and_set_bw(
	PADAPTER Adapter, u8 bSwitchChannel, u8 bSetBandWidth,
	u8 ChannelNum, CHANNEL_WIDTH ChnlWidth, u8 ChnlOffsetOf40MHz,
	u8 ChnlOffsetOf80MHz, u8 CenterFrequencyIndex1)
{
	PHAL_DATA_TYPE hal = GET_HAL_DATA(Adapter);
	u8 tmpChannel = hal->current_channel;
	CHANNEL_WIDTH tmpBW = hal->current_channel_bw;
	u8 tmpnCur40MhzPrimeSC = hal->nCur40MhzPrimeSC;
	u8 tmpnCur80MhzPrimeSC = hal->nCur80MhzPrimeSC;
	u8 tmpCenterFrequencyIndex1 = hal->CurrentCenterFrequencyIndex1;
	struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;


	/* check swchnl or setbw */
	if (!bSwitchChannel && !bSetBandWidth) {
		RTW_INFO("%s: not switch channel and not set bandwidth\n", __FUNCTION__);
		return;
	}

	/* skip switch channel operation for current channel & ChannelNum(will be switch) are the same */
	if (bSwitchChannel) {
		if (hal->current_channel != ChannelNum) {
			if (HAL_IsLegalChannel(Adapter, ChannelNum))
				hal->bSwChnl = _TRUE;
			else
				return;
		}
	}

	/* check set BandWidth */
	if (bSetBandWidth) {
		/* initial channel bw setting */
		if (hal->bChnlBWInitialized == _FALSE) {
			hal->bChnlBWInitialized = _TRUE;
			hal->bSetChnlBW = _TRUE;
		} else if ((hal->current_channel_bw != ChnlWidth) || /* check whether need set band or not */
			   (hal->nCur40MhzPrimeSC != ChnlOffsetOf40MHz) ||
			   (hal->nCur80MhzPrimeSC != ChnlOffsetOf80MHz) ||
			(hal->CurrentCenterFrequencyIndex1 != CenterFrequencyIndex1))
			hal->bSetChnlBW = _TRUE;
	}

	/* return if not need set bandwidth nor channel after check*/
	if (!hal->bSetChnlBW && !hal->bSwChnl && hal->bNeedIQK != _TRUE)
		return;

	/* set channel number to hal data */
	if (hal->bSwChnl) {
		hal->current_channel = ChannelNum;
		hal->CurrentCenterFrequencyIndex1 = ChannelNum;
	}

	/* set bandwidth info to hal data */
	if (hal->bSetChnlBW) {
		hal->current_channel_bw = ChnlWidth;
		hal->nCur40MhzPrimeSC = ChnlOffsetOf40MHz;
		hal->nCur80MhzPrimeSC = ChnlOffsetOf80MHz;
		hal->CurrentCenterFrequencyIndex1 = CenterFrequencyIndex1;
	}

	/* switch channel & bandwidth */
	if (!RTW_CANNOT_RUN(Adapter))
		rtl8821c_switch_chnl_and_set_bw(Adapter);
	else {
		if (hal->bSwChnl) {
			hal->current_channel = tmpChannel;
			hal->CurrentCenterFrequencyIndex1 = tmpChannel;
		}

		if (hal->bSetChnlBW) {
			hal->current_channel_bw = tmpBW;
			hal->nCur40MhzPrimeSC = tmpnCur40MhzPrimeSC;
			hal->nCur80MhzPrimeSC = tmpnCur80MhzPrimeSC;
			hal->CurrentCenterFrequencyIndex1 = tmpCenterFrequencyIndex1;
		}
	}
}

/*
 * Description:
 *	Change channel, bandwidth & offset
 * Parameters:
 *	center_ch	center channel
 *	bw		bandwidth
 *	offset40	channel offset for 40MHz Bandwidth
 *	offset80	channel offset for 80MHz Bandwidth
 */
void rtl8821c_set_channel_bw(PADAPTER adapter, u8 center_ch, CHANNEL_WIDTH bw, u8 offset40, u8 offset80)
{
	rtl8821c_handle_sw_chnl_and_set_bw(adapter, _TRUE, _TRUE, center_ch, bw, offset40, offset80, center_ch);
}

void rtl8821c_notch_filter_switch(PADAPTER adapter, bool enable)
{
	if (enable)
		RTW_INFO("%s: Enable notch filter\n", __FUNCTION__);
	else
		RTW_INFO("%s: Disable notch filter\n", __FUNCTION__);
}

#ifdef CONFIG_MP_INCLUDED
/*
 * Description:
 *	Config RF path
 *
 * Parameters:
 *	adapter	pointer of struct _ADAPTER
 */
void rtl8821c_mp_config_rfpath(PADAPTER adapter)
{
	PHAL_DATA_TYPE hal;
	PMPT_CONTEXT mpt;
	ANTENNA_PATH anttx, antrx;
	enum odm_rf_path_e rxant;


	hal = GET_HAL_DATA(adapter);
	mpt = &adapter->mppriv.mpt_ctx;
	anttx = hal->antenna_tx_path;
	antrx = hal->AntennaRxPath;
	RTW_INFO("+Config RF Path, tx=0x%x rx=0x%x\n", anttx, antrx);

#if 0 /* phydm not ready */
	switch (anttx) {
	case ANTENNA_A:
		mpt->mpt_rf_path = ODM_RF_A;
		break;
	case ANTENNA_B:
		mpt->mpt_rf_path = ODM_RF_B;
		break;
	case ANTENNA_AB:
	default:
		mpt->mpt_rf_path = ODM_RF_A | ODM_RF_B;
		break;
	}

	switch (antrx) {
	case ANTENNA_A:
		rxant = ODM_RF_A;
		break;
	case ANTENNA_B:
		rxant = ODM_RF_B;
		break;
	case ANTENNA_AB:
	default:
		rxant = ODM_RF_A | ODM_RF_B;
		break;
	}

	config_phydm_trx_mode_8821c(GET_PDM_ODM(adapter), mpt->mpt_rf_path, rxant, FALSE);
#endif
	RTW_INFO("-Config RF Path Finish\n");
}

#endif /* CONFIG_MP_INCLUDED */