rtl8821ce/include/rtl8192e_hal.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef __RTL8192E_HAL_H__
#define __RTL8192E_HAL_H__

/* #include "hal_com.h" */

#include "hal_data.h"

/* include HAL Related header after HAL Related compiling flags */
#include "rtl8192e_spec.h"
#include "rtl8192e_rf.h"
#include "rtl8192e_dm.h"
#include "rtl8192e_recv.h"
#include "rtl8192e_xmit.h"
#include "rtl8192e_cmd.h"
#include "rtl8192e_led.h"
#include "Hal8192EPwrSeq.h"
#include "Hal8192EPhyReg.h"
#include "Hal8192EPhyCfg.h"


#ifdef DBG_CONFIG_ERROR_DETECT
	#include "rtl8192e_sreset.h"
#endif

/* ---------------------------------------------------------------------
 *		RTL8192E Power Configuration CMDs for PCIe interface
 * --------------------------------------------------------------------- */
#define Rtl8192E_NIC_PWR_ON_FLOW				rtl8192E_power_on_flow
#define Rtl8192E_NIC_RF_OFF_FLOW				rtl8192E_radio_off_flow
#define Rtl8192E_NIC_DISABLE_FLOW				rtl8192E_card_disable_flow
#define Rtl8192E_NIC_ENABLE_FLOW				rtl8192E_card_enable_flow
#define Rtl8192E_NIC_SUSPEND_FLOW				rtl8192E_suspend_flow
#define Rtl8192E_NIC_RESUME_FLOW				rtl8192E_resume_flow
#define Rtl8192E_NIC_PDN_FLOW					rtl8192E_hwpdn_flow
#define Rtl8192E_NIC_LPS_ENTER_FLOW			rtl8192E_enter_lps_flow
#define Rtl8192E_NIC_LPS_LEAVE_FLOW			rtl8192E_leave_lps_flow


#if 1 /* download firmware related data structure */
#define FW_SIZE_8192E			0x8000 /* Compatible with RTL8192e Maximal RAM code size 32k */
#define FW_START_ADDRESS		0x1000
#define FW_END_ADDRESS			0x5FFF


#define IS_FW_HEADER_EXIST_8192E(_pFwHdr)	((GET_FIRMWARE_HDR_SIGNATURE_8192E(_pFwHdr) & 0xFFF0) == 0x92E0)



typedef struct _RT_FIRMWARE_8192E {
	FIRMWARE_SOURCE	eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
	u8			*szFwBuffer;
#else
	u8			szFwBuffer[FW_SIZE_8192E];
#endif
	u32			ulFwLength;
} RT_FIRMWARE_8192E, *PRT_FIRMWARE_8192E;

/*
 * This structure must be cared byte-ordering
 *
 * Added by tynli. 2009.12.04. */

/* *****************************************************
 *					Firmware Header(8-byte alinment required)
 * *****************************************************
 * --- LONG WORD 0 ---- */
#define GET_FIRMWARE_HDR_SIGNATURE_8192E(__FwHdr)		LE_BITS_TO_4BYTE(__FwHdr, 0, 16) /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */
#define GET_FIRMWARE_HDR_CATEGORY_8192E(__FwHdr)		LE_BITS_TO_4BYTE(__FwHdr, 16, 8) /* AP/NIC and USB/PCI */
#define GET_FIRMWARE_HDR_FUNCTION_8192E(__FwHdr)		LE_BITS_TO_4BYTE(__FwHdr, 24, 8) /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
#define GET_FIRMWARE_HDR_VERSION_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+4, 0, 16)/* FW Version */
#define GET_FIRMWARE_HDR_SUB_VER_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+4, 16, 8) /* FW Subversion, default 0x00 */
#define GET_FIRMWARE_HDR_RSVD1_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+4, 24, 8)

/* --- LONG WORD 1 ---- */
#define GET_FIRMWARE_HDR_MONTH_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+8, 0, 8) /* Release time Month field */
#define GET_FIRMWARE_HDR_DATE_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+8, 8, 8) /* Release time Date field */
#define GET_FIRMWARE_HDR_HOUR_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+8, 16, 8)/* Release time Hour field */
#define GET_FIRMWARE_HDR_MINUTE_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+8, 24, 8)/* Release time Minute field */
#define GET_FIRMWARE_HDR_ROMCODE_SIZE_8192E(__FwHdr)	LE_BITS_TO_4BYTE(__FwHdr+12, 0, 16)/* The size of RAM code */
#define GET_FIRMWARE_HDR_RSVD2_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+12, 16, 16)

/* --- LONG WORD 2 ---- */
#define GET_FIRMWARE_HDR_SVN_IDX_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+16, 0, 32)/* The SVN entry index */
#define GET_FIRMWARE_HDR_RSVD3_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+20, 0, 32)

/* --- LONG WORD 3 ---- */
#define GET_FIRMWARE_HDR_RSVD4_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+24, 0, 32)
#define GET_FIRMWARE_HDR_RSVD5_8192E(__FwHdr)			LE_BITS_TO_4BYTE(__FwHdr+28, 0, 32)

#endif /* download firmware related data structure */

#define DRIVER_EARLY_INT_TIME_8192E		0x05
#define BCN_DMA_ATIME_INT_TIME_8192E		0x02
#define RX_DMA_SIZE_8192E					0x4000	/* 16K*/

#ifdef CONFIG_WOWLAN
	#define RESV_FMWF	(WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/
#else
	#define RESV_FMWF	0
#endif

#ifdef CONFIG_FW_C2H_DEBUG
	#define RX_DMA_RESERVED_SIZE_8192E	0x100	/* 256B, reserved for c2h debug message*/
#else
	#define RX_DMA_RESERVED_SIZE_8192E	0x40	/* 64B, reserved for c2h event(16bytes) or ccx(8 Bytes)*/
#endif
#define MAX_RX_DMA_BUFFER_SIZE_8192E		(RX_DMA_SIZE_8192E-RX_DMA_RESERVED_SIZE_8192E)	/*RX 16K*/

/* For General Reserved Page Number(Beacon Queue is reserved page)
 * if (CONFIG_2BCN_EN) Beacon:4, PS-Poll:1, Null Data:1,Prob Rsp:1,Qos Null Data:1
 * Beacon:2, PS-Poll:1, Null Data:1,Prob Rsp:1,Qos Null Data:1 */
#define RSVD_PAGE_NUM_8192E		0x08
/* For WoWLan , more reserved page
 * ARP Rsp:1, RWC:1, GTK Info:1,GTK RSP:2,GTK EXT MEM:2, AOAC rpt: 1,PNO: 6 */
#ifdef CONFIG_WOWLAN
	#define WOWLAN_PAGE_NUM_8192E	0x08
#else
	#define WOWLAN_PAGE_NUM_8192E	0x00
#endif

#ifdef CONFIG_PNO_SUPPORT
	#undef WOWLAN_PAGE_NUM_8192E
	#define WOWLAN_PAGE_NUM_8192E	0x0d
#endif

/* Note:
Tx FIFO Size : 64KB
Tx page Size : 256B
Total page numbers : 256(0x100)
*/

#define	TOTAL_RSVD_PAGE_NUMBER_8192E	(RSVD_PAGE_NUM_8192E + WOWLAN_PAGE_NUM_8192E)

#define	TOTAL_PAGE_NUMBER_8192E	(0x100)
#define	TX_TOTAL_PAGE_NUMBER_8192E	(TOTAL_PAGE_NUMBER_8192E - TOTAL_RSVD_PAGE_NUMBER_8192E)

#define	TX_PAGE_BOUNDARY_8192E	(TX_TOTAL_PAGE_NUMBER_8192E) /* beacon header start address */


#define PAGE_SIZE_TX_92E	PAGE_SIZE_256
#define RSVD_PKT_LEN_92E	(TOTAL_RSVD_PAGE_NUMBER_8192E * PAGE_SIZE_TX_92E)

#define TX_PAGE_LOAD_FW_BOUNDARY_8192E		0x47 /* 0xA5 */
#define TX_PAGE_BOUNDARY_WOWLAN_8192E		0xE0

/* For Normal Chip Setting
 * (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_92C */

#define NORMAL_PAGE_NUM_HPQ_8192E			0x10
#define NORMAL_PAGE_NUM_LPQ_8192E			0x10
#define NORMAL_PAGE_NUM_NPQ_8192E			0x10
#define NORMAL_PAGE_NUM_EPQ_8192E			0x00


/* Note: For WMM Normal Chip Setting ,modify later */
#define WMM_NORMAL_PAGE_NUM_HPQ_8192E		NORMAL_PAGE_NUM_HPQ_8192E
#define WMM_NORMAL_PAGE_NUM_LPQ_8192E		NORMAL_PAGE_NUM_LPQ_8192E
#define WMM_NORMAL_PAGE_NUM_NPQ_8192E		NORMAL_PAGE_NUM_NPQ_8192E


/* -------------------------------------------------------------------------
 *	Chip specific
 * ------------------------------------------------------------------------- */

/* pic buffer descriptor */
#define RTL8192EE_SEG_NUM			TX_BUFFER_SEG_NUM
#define TX_DESC_NUM_92E			128
#define RX_DESC_NUM_92E			128

/* -------------------------------------------------------------------------
 *	Channel Plan
 * ------------------------------------------------------------------------- */

#define		HWSET_MAX_SIZE_8192E			512

#define		EFUSE_REAL_CONTENT_LEN_8192E	512

#define		EFUSE_MAP_LEN_8192E			512
#define		EFUSE_MAX_SECTION_8192E		64
#define		EFUSE_MAX_WORD_UNIT_8192E		4
#define		EFUSE_IC_ID_OFFSET_8192E		506	/* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define		AVAILABLE_EFUSE_ADDR_8192E(addr)	(addr < EFUSE_REAL_CONTENT_LEN_8192E)
/*
 * <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
 * 9bytes + 1byt + 5bytes and pre 1byte.
 * For worst case:
 * | 1byte|----8bytes----|1byte|--5bytes--|
 * |         |            Reserved(14bytes)	      |
 *   */
#define		EFUSE_OOB_PROTECT_BYTES_8192E 		15	/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */



/* ********************************************************
 *			EFUSE for BT definition
 * ******************************************************** */
#define		EFUSE_BT_REAL_BANK_CONTENT_LEN_8192E	512
#define		EFUSE_BT_REAL_CONTENT_LEN_8192E			1024	/* 512*2 */
#define		EFUSE_BT_MAP_LEN_8192E					1024	/* 1k bytes */
#define		EFUSE_BT_MAX_SECTION_8192E				128		/* 1024/8 */

#define		EFUSE_PROTECT_BYTES_BANK_8192E			16
#define		EFUSE_MAX_BANK_8192E					3
/* *********************************************************** */

#define INCLUDE_MULTI_FUNC_BT(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)

/* #define IS_MULTI_FUNC_CHIP(_Adapter)	(((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) */

/* #define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) */

/* rtl8812_hal_init.c */
void	_8051Reset8192E(PADAPTER padapter);
s32	FirmwareDownload8192E(PADAPTER Adapter, BOOLEAN bUsedWoWLANFw);
void	InitializeFirmwareVars8192E(PADAPTER padapter);

s32	InitLLTTable8192E(PADAPTER padapter, u8 txpktbuf_bndy);

/* EFuse */
u8	GetEEPROMSize8192E(PADAPTER padapter);
void	hal_InitPGData_8192E(PADAPTER padapter, u8 *PROMContent);
void	Hal_EfuseParseIDCode8192E(PADAPTER padapter, u8 *hwinfo);
void	Hal_ReadPROMVersion8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void	Hal_ReadPowerSavingMode8192E(PADAPTER padapter, u8	*hwinfo, BOOLEAN	AutoLoadFail);
void	Hal_ReadTxPowerInfo8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN	AutoLoadFail);
void	Hal_ReadBoardType8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void	Hal_ReadThermalMeter_8192E(PADAPTER	Adapter, u8 *PROMContent, BOOLEAN	AutoloadFail);
void	Hal_ReadChannelPlan8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void	Hal_EfuseParseXtal_8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void	Hal_ReadAntennaDiversity8192E(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void	Hal_ReadPAType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void	Hal_ReadAmplifierType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void	Hal_ReadRFEType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void	Hal_EfuseParseBTCoexistInfo8192E(PADAPTER Adapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void	Hal_EfuseParseKFreeData_8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);

u8 Hal_CrystalAFEAdjust(_adapter *Adapter);

BOOLEAN HalDetectPwrDownMode8192E(PADAPTER Adapter);

#if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN)
	void Hal_DetectWoWMode(PADAPTER pAdapter);
#endif /* CONFIG_WOWLAN */

/***********************************************************/
/* RTL8192E-MAC Setting */
VOID _InitQueueReservedPage_8192E(IN  PADAPTER Adapter);
VOID _InitQueuePriority_8192E(IN	PADAPTER Adapter);
VOID _InitTxBufferBoundary_8192E(IN PADAPTER Adapter, IN u8 txpktbuf_bndy);
VOID _InitPageBoundary_8192E(IN PADAPTER Adapter);
/* VOID _InitTransferPageSize_8192E(IN PADAPTER Adapter); */
VOID _InitDriverInfoSize_8192E(IN PADAPTER Adapter, IN u8 drvInfoSize);
VOID _InitRDGSetting_8192E(PADAPTER Adapter);
void _InitID_8192E(IN  PADAPTER Adapter);
VOID _InitNetworkType_8192E(IN  PADAPTER Adapter);
VOID _InitWMACSetting_8192E(IN PADAPTER Adapter);
VOID _InitAdaptiveCtrl_8192E(IN  PADAPTER Adapter);
VOID _InitRateFallback_8192E(IN  PADAPTER Adapter);
VOID _InitEDCA_8192E(IN  PADAPTER Adapter);
VOID _InitRetryFunction_8192E(IN  PADAPTER Adapter);
VOID _BBTurnOnBlock_8192E(IN	PADAPTER Adapter);
VOID _InitBeaconParameters_8192E(IN  PADAPTER Adapter);
VOID _InitBeaconMaxError_8192E(
	IN  PADAPTER	Adapter,
	IN	BOOLEAN		InfraMode
);
void SetBeaconRelatedRegisters8192E(PADAPTER padapter);
VOID hal_ReadRFType_8192E(PADAPTER	Adapter);
/* RTL8192E-MAC Setting
 ***********************************************************/

void SetHwReg8192E(PADAPTER Adapter, u8 variable, u8 *val);
void GetHwReg8192E(PADAPTER Adapter, u8 variable, u8 *val);
u8
SetHalDefVar8192E(
	IN	PADAPTER				Adapter,
	IN	HAL_DEF_VARIABLE		eVariable,
	IN	PVOID					pValue
);
u8
GetHalDefVar8192E(
	IN	PADAPTER				Adapter,
	IN	HAL_DEF_VARIABLE		eVariable,
	IN	PVOID					pValue
);

void rtl8192e_set_hal_ops(struct hal_ops *pHalFunc);
void init_hal_spec_8192e(_adapter *adapter);
void rtl8192e_init_default_value(_adapter *padapter);
/* register */
void SetBcnCtrlReg(PADAPTER padapter, u8 SetBits, u8 ClearBits);

void rtl8192e_start_thread(_adapter *padapter);
void rtl8192e_stop_thread(_adapter *padapter);

#ifdef CONFIG_PCI_HCI
	BOOLEAN	InterruptRecognized8192EE(PADAPTER Adapter);
	u16	get_txdesc_buf_addr(u16 ff_hwaddr);
#endif

#ifdef CONFIG_SDIO_HCI
	#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
		void _init_available_page_threshold(PADAPTER padapter, u8 numHQ, u8 numNQ, u8 numLQ, u8 numPubQ);
	#endif
#endif

#ifdef CONFIG_BT_COEXIST
	void rtl8192e_combo_card_WifiOnlyHwInit(PADAPTER Adapter);
#endif

#endif /* __RTL8192E_HAL_H__ */