rtl8821ce/include/rtl8188e_hal.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2017 Realtek Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 *****************************************************************************/
#ifndef __RTL8188E_HAL_H__
#define __RTL8188E_HAL_H__

/* #include "hal_com.h" */
#include "hal_data.h"

/* include HAL Related header after HAL Related compiling flags */
#include "rtl8188e_spec.h"
#include "Hal8188EPhyReg.h"
#include "Hal8188EPhyCfg.h"
#include "rtl8188e_rf.h"
#include "rtl8188e_dm.h"
#include "rtl8188e_recv.h"
#include "rtl8188e_xmit.h"
#include "rtl8188e_cmd.h"
#include "rtl8188e_led.h"
#include "Hal8188EPwrSeq.h"
#ifdef DBG_CONFIG_ERROR_DETECT
	#include "rtl8188e_sreset.h"
#endif

/* --------------------------------------------------------------------- */
/*		RTL8188E Power Configuration CMDs for USB/SDIO/PCIE interfaces */
/* --------------------------------------------------------------------- */
#define Rtl8188E_NIC_PWR_ON_FLOW				rtl8188E_power_on_flow
#define Rtl8188E_NIC_RF_OFF_FLOW				rtl8188E_radio_off_flow
#define Rtl8188E_NIC_DISABLE_FLOW				rtl8188E_card_disable_flow
#define Rtl8188E_NIC_ENABLE_FLOW				rtl8188E_card_enable_flow
#define Rtl8188E_NIC_SUSPEND_FLOW				rtl8188E_suspend_flow
#define Rtl8188E_NIC_RESUME_FLOW				rtl8188E_resume_flow
#define Rtl8188E_NIC_PDN_FLOW					rtl8188E_hwpdn_flow
#define Rtl8188E_NIC_LPS_ENTER_FLOW			rtl8188E_enter_lps_flow
#define Rtl8188E_NIC_LPS_LEAVE_FLOW			rtl8188E_leave_lps_flow


#if 1 /* download firmware related data structure */
#define MAX_FW_8188E_SIZE			0x8000 /* 32768, 32k / 16384, 16k */

#define FW_8188E_SIZE				0x4000 /* 16384, 16k */
#define FW_8188E_SIZE_2			0x8000 /* 32768, 32k */

#define FW_8188E_START_ADDRESS	0x1000
#define FW_8188E_END_ADDRESS		0x1FFF /* 0x5FFF */


#define IS_FW_HEADER_EXIST_88E(_pFwHdr)	((le16_to_cpu(_pFwHdr->Signature) & 0xFFF0) == 0x88E0)

typedef struct _RT_FIRMWARE_8188E {
	FIRMWARE_SOURCE	eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
	u8			*szFwBuffer;
#else
	u8			szFwBuffer[MAX_FW_8188E_SIZE];
#endif
	u32			ulFwLength;
} RT_FIRMWARE_8188E, *PRT_FIRMWARE_8188E;

/*
 * This structure must be cared byte-ordering
 *   */

typedef struct _RT_8188E_FIRMWARE_HDR {
	/* 8-byte alinment required */

	/* --- LONG WORD 0 ---- */
	u16		Signature;	/* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */
	u8		Category;	/* AP/NIC and USB/PCI */
	u8		Function;	/* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
	u16		Version;		/* FW Version */
	u8		Subversion;	/* FW Subversion, default 0x00 */
	u16		Rsvd1;


	/* --- LONG WORD 1 ---- */
	u8		Month;	/* Release time Month field */
	u8		Date;	/* Release time Date field */
	u8		Hour;	/* Release time Hour field */
	u8		Minute;	/* Release time Minute field */
	u16		RamCodeSize;	/* The size of RAM code */
	u8		Foundry;
	u8		Rsvd2;

	/* --- LONG WORD 2 ---- */
	u32		SvnIdx;	/* The SVN entry index */
	u32		Rsvd3;

	/* --- LONG WORD 3 ---- */
	u32		Rsvd4;
	u32		Rsvd5;
} RT_8188E_FIRMWARE_HDR, *PRT_8188E_FIRMWARE_HDR;
#endif /* download firmware related data structure */


#define DRIVER_EARLY_INT_TIME_8188E			0x05
#define BCN_DMA_ATIME_INT_TIME_8188E		0x02


/* #define MAX_RX_DMA_BUFFER_SIZE_88E	      0x2400 */ /* 9k for 88E nornal chip , */ /* MaxRxBuff=10k-max(TxReportSize(64*8), WOLPattern(16*24)) */
#ifdef CONFIG_USB_HCI
	#define RX_DMA_SIZE_88E(__Adapter) 0x2800
#else
	#define RX_DMA_SIZE_88E(__Adapter) ((!IS_VENDOR_8188E_I_CUT_SERIES(__Adapter))?0x2800:0x4000)
#endif

#ifdef CONFIG_WOWLAN
	#define RESV_FMWF	(WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/
#else
	#define RESV_FMWF	0
#endif

#define RX_DMA_RESERVD_FW_FEATURE	0x200 /* for tx report (64*8) */

#define MAX_RX_DMA_BUFFER_SIZE_88E(__Adapter) (RX_DMA_SIZE_88E(__Adapter)-RX_DMA_RESERVD_FW_FEATURE)

#define MAX_TX_REPORT_BUFFER_SIZE			0x0400 /* 1k */

#define PAGE_SIZE_TX_88E PAGE_SIZE_128
/* Note: We will divide number of page equally for each queue other than public queue!
 * 22k = 22528 bytes = 176 pages (@page =  128 bytes)
 * BCN rsvd_page_num = MAX_BEACON_LEN / PAGE_SIZE_TX_88E
 * 1 ps-poll / 1 null-data /1 prob_rsp /1 QOS null-data = 4 pages */

#define BCNQ_PAGE_NUM_88E		(MAX_BEACON_LEN / PAGE_SIZE_TX_88E + 4) /*0x09*/

/* For WoWLan , more reserved page */
#ifdef CONFIG_WOWLAN
	/* 1 ArpRsp + 2 NbrAdv + 2 NDPInfo + 1 RCI + 1 AOAC = 7 pages */
	#define WOWLAN_PAGE_NUM_88E	0x07
#else
	#define WOWLAN_PAGE_NUM_88E	0x00
#endif

/* Note:
Tx FIFO Size : previous CUT:22K /I_CUT after:32KB
Tx page Size : 128B
Total page numbers : 176(0xB0) / 256(0x100)
*/
#ifdef CONFIG_USB_HCI
	#define TOTAL_PAGE_NUMBER_88E(_Adapter) (0xB0 - 1)
#else
	#define TOTAL_PAGE_NUMBER_88E(_Adapter)	((IS_VENDOR_8188E_I_CUT_SERIES(_Adapter)?0x100:0xB0) - 1)/* must reserved 1 page for dma issue */
#endif
#define TX_TOTAL_PAGE_NUMBER_88E(_Adapter)	(TOTAL_PAGE_NUMBER_88E(_Adapter) - BCNQ_PAGE_NUM_88E - WOWLAN_PAGE_NUM_88E)
#define TX_PAGE_BOUNDARY_88E(_Adapter)		(TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1) /* beacon header start address */

#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter)	TX_TOTAL_PAGE_NUMBER_88E(_Adapter)
#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E(_Adapter)		(WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_88E(_Adapter) + 1)

/* For Normal Chip Setting
 * (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_8723B */
#define NORMAL_PAGE_NUM_HPQ_88E		0x0
#define NORMAL_PAGE_NUM_LPQ_88E		0x09
#define NORMAL_PAGE_NUM_NPQ_88E		0x0

/* Note: For Normal Chip Setting, modify later */
#define WMM_NORMAL_PAGE_NUM_HPQ_88E		0x29
#define WMM_NORMAL_PAGE_NUM_LPQ_88E		0x1C
#define WMM_NORMAL_PAGE_NUM_NPQ_88E		0x1C


/* -------------------------------------------------------------------------
 *	Chip specific
 * ------------------------------------------------------------------------- */
#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22) & 0x3)
#define CHIP_BONDING_92C_1T2R	0x1
#define CHIP_BONDING_88C_USB_MCARD	0x2
#define CHIP_BONDING_88C_USB_HP	0x1

/* -------------------------------------------------------------------------
 *	Channel Plan
 * ------------------------------------------------------------------------- */


#define EFUSE_REAL_CONTENT_LEN		512
#define EFUSE_MAP_LEN				128
#define EFUSE_MAX_SECTION			16
#define EFUSE_IC_ID_OFFSET			506	/* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define AVAILABLE_EFUSE_ADDR(addr)	(addr < EFUSE_REAL_CONTENT_LEN)
/*
 * <Roger_Notes>
 * To prevent out of boundary programming case,
 * leave 1byte and program full section
 * 9bytes + 1byt + 5bytes and pre 1byte.
 * For worst case:
 * | 1byte|----8bytes----|1byte|--5bytes--|
 * |         |            Reserved(14bytes)	      |
 *   */
#define EFUSE_OOB_PROTECT_BYTES 		15	/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */

#define		EFUSE_REAL_CONTENT_LEN_88E	256
#define		EFUSE_MAP_LEN_88E		512
#define		EFUSE_MAX_SECTION_88E		64
#define		EFUSE_MAX_WORD_UNIT_88E		4
#define		EFUSE_IC_ID_OFFSET_88E			506	/* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define		AVAILABLE_EFUSE_ADDR_88E(addr)	(addr < EFUSE_REAL_CONTENT_LEN_88E)
/* <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
 * 9bytes + 1byt + 5bytes and pre 1byte.
 * For worst case:
 * | 2byte|----8bytes----|1byte|--7bytes--|  */ /* 92D */
#define 		EFUSE_OOB_PROTECT_BYTES_88E	18	/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
#define		EFUSE_PROTECT_BYTES_BANK_88E	16


/* ********************************************************
 *			EFUSE for BT definition
 * ******************************************************** */
#define EFUSE_BT_REAL_CONTENT_LEN		1536	/* 512*3 */
#define EFUSE_BT_MAP_LEN				1024	/* 1k bytes */
#define EFUSE_BT_MAX_SECTION			128		/* 1024/8 */

#define EFUSE_PROTECT_BYTES_BANK		16

#define INCLUDE_MULTI_FUNC_BT(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)

/* #define IS_MULTI_FUNC_CHIP(_Adapter)	(((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) */

/* #define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) */

#ifdef CONFIG_PCI_HCI
	/* according to the define in the rtw_xmit.h, rtw_recv.h */
	#define TX_DESC_NUM_8188EE  TXDESC_NUM   /* 128 */
	#ifdef CONFIG_CONCURRENT_MODE
		/*#define BE_QUEUE_TX_DESC_NUM_8188EE  (TXDESC_NUM<<1)*/		/* 256 */
		#define BE_QUEUE_TX_DESC_NUM_8188EE  ((TXDESC_NUM<<1)+(TXDESC_NUM>>1))    /* 320 */
		/*#define BE_QUEUE_TX_DESC_NUM_8188EE  ((TXDESC_NUM<<1)+TXDESC_NUM)*/    /* 384 */
	#else
		#define BE_QUEUE_TX_DESC_NUM_8188EE  TXDESC_NUM /* 128 */
		/*#define BE_QUEUE_TX_DESC_NUM_8188EE  (TXDESC_NUM+(TXDESC_NUM>>1)) */ /* 192 */
	#endif

	void InterruptRecognized8188EE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent);
	void UpdateInterruptMask8188EE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1);
#endif /* CONFIG_PCI_HCI */

/* rtl8188e_hal_init.c */

s32 rtl8188e_FirmwareDownload(PADAPTER padapter, BOOLEAN  bUsedWoWLANFw);
void _8051Reset88E(PADAPTER padapter);
void rtl8188e_InitializeFirmwareVars(PADAPTER padapter);


s32 InitLLTTable(PADAPTER padapter, u8 txpktbuf_bndy);

/* EFuse */
u8 GetEEPROMSize8188E(PADAPTER padapter);
void Hal_InitPGData88E(PADAPTER padapter);
void Hal_EfuseParseIDCode88E(PADAPTER padapter, u8 *hwinfo);
void Hal_ReadTxPowerInfo88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN	AutoLoadFail);

void Hal_EfuseParseEEPROMVer88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void rtl8188e_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseCustomerID88E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadAntennaDiversity88E(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void Hal_ReadThermalMeter_88E(PADAPTER	Adapter, u8 *PROMContent, BOOLEAN	AutoloadFail);
void Hal_EfuseParseXtal_8188E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseBoardType88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadPowerSavingMode88E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadPAType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadAmplifierType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadRFEType_8188E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);

BOOLEAN HalDetectPwrDownMode88E(PADAPTER Adapter);

#if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN)
	void Hal_DetectWoWMode(PADAPTER pAdapter);
#endif /* CONFIG_WOWLAN */


#ifdef CONFIG_RF_POWER_TRIM
	void Hal_ReadRFGainOffset(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
#endif /*CONFIG_RF_POWER_TRIM*/


void InitBeaconParameters_8188e(_adapter *adapter);
void SetBeaconRelatedRegisters8188E(PADAPTER padapter);

void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
void init_hal_spec_8188e(_adapter *adapter);

void rtl8188e_start_thread(_adapter *padapter);
void rtl8188e_stop_thread(_adapter *padapter);

void rtw_IOL_cmd_tx_pkt_buf_dump(ADAPTER *Adapter, int data_len);
#ifdef CONFIG_IOL_EFUSE_PATCH
	s32 rtl8188e_iol_efuse_patch(PADAPTER padapter);
#endif/* CONFIG_IOL_EFUSE_PATCH */
void _InitTransferPageSize(PADAPTER padapter);

u8 SetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val);
void GetHwReg8188E(PADAPTER padapter, u8 variable, u8 *val);

u8
GetHalDefVar8188E(
	IN	PADAPTER				Adapter,
	IN	HAL_DEF_VARIABLE		eVariable,
	IN	PVOID					pValue
);
#ifdef CONFIG_GPIO_API
int rtl8188e_GpioFuncCheck(PADAPTER adapter, u8 gpio_num);
#endif
#endif /* __RTL8188E_HAL_H__ */